Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series steering damper which one

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 35
Joined: Sun Mar 23, 2008 4:55 pm
Location: traralgon

80 series steering damper which one

Post by ferg640 »

could somebody give me some feedback on steering dampners for an 80 series.Do i go standard aftermarket or return to centre.Also what brand are people using.Thanks for any help.
Top
Posts: 267
Joined: Fri Nov 05, 2004 6:42 pm
Location: central coast nsw

Post by dirty harry »

i have a old man emu on my 80 works fine,
i haven't had a return to center one on any of my 4wd's ,
but looks like a lot of money for a shock with a spring :lol:
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

I dont run one.

there is alot of info in gen tech not long ago where a guy was asking similar Q's.
i think most people agreed RTC is a waste of $$.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

RTC is a watse of money, it just masks problems, if ur castor is right then u wont need one..
Top
User avatar
udm
Posts: 659
Joined: Tue Apr 26, 2005 8:35 pm

Post by udm »

rtc big waste of space
Ulises

www.OzSigns.com - 0400008422
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Just get a normal heavy duty one mate e.g. Dobinsons, EFS Xtreme, Bilstein etc. If your truck has shimmy or is wandering you have other issues that need addressing.
Top
Posts: 35
Joined: Sun Mar 23, 2008 4:55 pm
Location: traralgon

thanks

Post by ferg640 »

hey fella's thanks for your comments.This has confirmed what i was thinking.Will go for a large bore one probably tough dog.Thanks again for the help
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest