Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hey guys, need a little bit of advice.
What length extended brake lines do I need to get.
2inch Lifted Springs and MAYBE down the track 2in Body Lift.
Using 55mm extended anti-inversion shackles Pin to pin distance is 135mm.
Do I get 4in lift length or 6in Lift Length.
What are these lengths so I can get them made at Local Brake Shop.
pretty sure body lift is irrelivent when extending your brake hoses as they are attached to your chassis not the body.
just take your old hoses down to your local shop and ask for 200mm longer.
mine are rather long but any extra is tucked inside the engine bay.
mine just cost me 80 bucks.
