Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

chasing some Info regarding PTO assembly for MQ/MK

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

chasing some Info regarding PTO assembly for MQ/MK

Post by pongo »

OK, Ive been looking for some info regarding Pto's for the MQ/MK.
Mine bolts to the back of the transfer and goes where the main shaft ends. Undo the rear cover plate on transfer and it slips on there.

The other type ive seen curtosy of RMP&O is one that replaces a small cover on the left? side of the gearbox and runs off the layshaft.

How common are both types?

And which would be stronger?

Mine looks like it caused a mainshaft bearing failure. I bought it like this, and id say there was a few issues as the box looks rebuilt.

Anyone got a gearbox mounted PTO for sale?

I also have no idea how mine gets it oil. Looks like would be seperate from the transfer as is uphill from the main shaft?
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

found a thread in 4x4 action. according to this they reckon mine would be a thomas item not a genuine.


http://www.4wdaction.com.au/forum/showt ... hp?t=62389



other type im looking for

Image
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Re: chasing some Info regarding PTO assembly for MQ/MK

Post by Reddo »

pongo wrote:OK, Ive been looking for some info regarding Pto's for the MQ/MK.
Mine bolts to the back of the transfer and goes where the main shaft ends. Undo the rear cover plate on transfer and it slips on there.

The other type ive seen curtosy of RMP&O is one that replaces a small cover on the left? side of the gearbox and runs off the layshaft.

How common are both types?

And which would be stronger?

Mine looks like it caused a mainshaft bearing failure. I bought it like this, and id say there was a few issues as the box looks rebuilt.

Anyone got a gearbox mounted PTO for sale?

I also have no idea how mine gets it oil. Looks like would be seperate from the transfer as is uphill from the main shaft?
i cant say i've seen a whole lot of PTO drives/winches for the MK/GQ patrols, however as far as i know, the safari was the only model that had PTO winches fitted.

Strength, well i don't thing its going to be a problem, as the winch is designed to have a shear pin to prevent it becoming a problem.

and i just exhausted my knowledge of pto winchs

mine was the same sorta set up for the GQ

Image
Nice gq swb ute chop with a huffer for the good times
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests