Hi people I own and drive a 1968 CJ 6 in the vic winch for the last 3 years this year we are competing in a couple of the engel series winch events. I have a couple of questions.
1. I have to make steel doors to be more compliant for the events we compete in ,I have got the doors under control but would like some help with the handles and hinges. !!!!
2. if any one in the world of jeeps would be able to offer any kind off sponser ship to support us and the sport we are open to offers . We have increasingly growing support from spectators and other drivers as we drive something different and do it with fun and determination. We are currently putting together a disk for promo. You can see our jeep on youtube under vicwinch 2008
http://www.youtube.com/watch?v=WROQeGC1bTk
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
jeep racing
Moderator: GUtripper
IF YOU NORMALLY RUN THE SOFT DOORS CANT YOU JUST PLATE THEM UP.
Caps lok off....
There a steel frame so just rip off the vinyl and attatch a sheet of 3mm ally, Failing that jump on Ausjeepoffroad.com and put a wanted add for some hinges and stuff that you need.
Saw you at Vic winch few weeks back. Good weekend for you guys. Well done.
Caps lok off....
There a steel frame so just rip off the vinyl and attatch a sheet of 3mm ally, Failing that jump on Ausjeepoffroad.com and put a wanted add for some hinges and stuff that you need.
Saw you at Vic winch few weeks back. Good weekend for you guys. Well done.
Re: jeep racing
Have you looked at Quadratec.com or any other US jeep part websites? They have heaps of bits available. The US websites are HUGE.Daggy wrote:Hi people I own and drive a 1968 CJ 6 in the vic winch for the last 3 years this year we are competing in a couple of the engel series winch events. I have a couple of questions.
1. I have to make steel doors to be more compliant for the events we compete in ,I have got the doors under control but would like some help with the handles and hinges. !!!!
2. if any one in the world of jeeps would be able to offer any kind off sponser ship to support us and the sport we are open to offers . We have increasingly growing support from spectators and other drivers as we drive something different and do it with fun and determination. We are currently putting together a disk for promo. You can see our jeep on youtube under vicwinch 2008
http://www.youtube.com/watch?v=WROQeGC1bTk
cheers
Thanks for the info managed to get tube doors made in time for round 1 engel series still working on door handles.TEE JAY wrote:IF YOU NORMALLY RUN THE SOFT DOORS CANT YOU JUST PLATE THEM UP.
Caps lok off....
There a steel frame so just rip off the vinyl and attatch a sheet of 3mm ally, Failing that jump on Ausjeepoffroad.com and put a wanted add for some hinges and stuff that you need.
Saw you at Vic winch few weeks back. Good weekend for you guys. Well done.
We were happy with vic winch this year found a few other bugs with the truck the harder you try to push it. Ateco is the next event for us, thanks for your comments
Who is online
Users browsing this forum: No registered users and 0 guests