Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Fitting 15 inch rims

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 146
Joined: Thu May 07, 2009 3:10 pm
Location: Sunshine coast QLD

Fitting 15 inch rims

Post by Jonezy01 »

Mate has a 94 model 80 series as it came factory with 16's he now wants 15's as he pick up a set of 35inch wrangler MTR but they fowl on the calipers and we were wondering if it safe enough to grind the calipers and if so how much can we take off as it only needs about 1 to 1.5 mm taken
Top
Posts: 109
Joined: Sun Jan 07, 2007 7:01 pm
Location: woodford, QLD

Post by abauer01 »

hey i ground mine, probly shouldnt of but only had to take a small amount off in the end. But since have noticed with my new rims which have custom offset that they crear by a long way. So maybe wheel spacers will allow them to clear abit more. i mite be wrong as i have not tried it.
Top
Posts: 267
Joined: Fri Nov 05, 2004 6:42 pm
Location: central coast nsw

Post by dirty harry »

abauer01 what was the offset of your new rims
Top
Posts: 20
Joined: Wed Apr 01, 2009 6:08 am
Location: Brisbane

Post by wrinkled bits »

hi, i used a 6mm packer on the rear wheels, my rims are 15 x 8 with 10.5 x 15 simex centipedes , works fine, bought the packers from auto barn .
Top
Posts: 73
Joined: Sun Feb 08, 2009 12:38 am
Location: coolum,qld

Post by mq_camo »

thied to fit 10 inch rims to an 80, no go there hey, bit of a bummer.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests