Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2000 1HZ TROOPY

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

2000 1HZ TROOPY

Post by MART »

After a schematic of the gearbox and transfer case please , or a link , wanting to know if the gearbox shaft connects directly to transfer , gearbox and transfer shift correctly , but the truck no movy , the output on the transfer vibrates , Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Posts: 141
Joined: Fri Nov 12, 2004 4:46 pm
Location: Newcastle

Post by mickbeny »

Hi all...Mart,Yes,Its a 2 peice shaft.
PEACE...
Posts: 185
Joined: Mon May 05, 2008 3:54 pm
Location: Canberra, ACT, Australia

Post by SimonInAustralia »

Sounds like it could be the 2 piece output shaft that has stripped splines.

This is a known problem with these gearboxes up until the factory fixed them sometime in 2002 or 2003.

The fix is a stronger single piece output shaft.

I put some info about it up on another forum...
http://forum.ih8mud.com/70-series-tech/ ... ost4355744

Probably too late for Toyota to fix it for free, but I would try anyway.
Post Reply

Who is online

Users browsing this forum: No registered users and 45 guests