Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Power Steering Belts, LN106

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Power Steering Belts, LN106

Post by Weiner »

Hi guys,

Almost done my manual steer to power steer conversion but am a bit stuck.

Does anyone have pictures of their belt setup on their luxes with power steer and no air con.

Can I get one big belt to go over all 4 pulleys or do I have to get something different?

Cheers.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 658
Joined: Wed Feb 13, 2008 5:41 pm
Location: Brissy

Post by yamaha__308 »

These any help?

Image

Image
Top
Posts: 85
Joined: Thu Dec 01, 2005 2:19 pm
Location: mudgee

Post by granborismo »

they usually just run a small belt from crank to p/s pump.
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Ok thanks guys, pics help, seems I need to get another pulley thing fo rthe belt to go on.

Damn..
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 11
Joined: Thu Dec 16, 2004 5:31 pm
Location: VIC

Post by Manky »

From memory the power steering runs off a separate pulley wheel that bolts to the front of the harmonic balancer, giving you the four grooves in the pic above (two for the alternator, one for air con and one for power steer). Should be pretty cheap from the wreckers.
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Manky wrote:From memory the power steering runs off a separate pulley wheel that bolts to the front of the harmonic balancer, giving you the four grooves in the pic above (two for the alternator, one for air con and one for power steer). Should be pretty cheap from the wreckers.
Thanks mate, hopefully going to the wreckers tomorrow to grab it, hopefully its going soon :armsup:

Also gotta figure out how the lines go as its like a jigsaw at the moment :oops:
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Just a heads up for anyone else doing this.

You'll need either a new radiator or your existing radiator changed as the lower hose gets in the way of the pump.

Apparently power steer models have the lower hose on the RHS.

$300 for a brand new rad doesn't seem too bad.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests