Hey all,
the rear power window in my 4runner isnt working, it wont go up or down.
taken the switch out and it works fine.
Wired the motor up straight to a 12v battery and it works then reversed the polarity for it to go up or down.
Will double check the wires going to the switch. It may be the relay that has carked it???
any help?
Cheers
Dan
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4runner rear power window.
Moderators: toaddog, Elmo, DUDELUX
4runner rear power window.
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Weird, but I happened to be talking to a workmate with a 4runner the other day about the exact same fault you are having, his was actually open and wouldn't opperate.
He got in the back quater panel and pulled all the electrical plugs for the window apart to clean the contacts and then put them back together again (so he thought) and it all worked.
When he had finished and just about to close up the trim he found one plug still disconnected so reconnected it, window stopped working straight away.
Apparently there is a sensor or control unit that is a common fault which is stopping the window from working, he just left it uplugged and his still works fine.
Can't ask him for a few weeks what plug it is as he is on holidays right now, but you could maybe just unplug one at a time and see if you have any luck.
He got in the back quater panel and pulled all the electrical plugs for the window apart to clean the contacts and then put them back together again (so he thought) and it all worked.
When he had finished and just about to close up the trim he found one plug still disconnected so reconnected it, window stopped working straight away.
Apparently there is a sensor or control unit that is a common fault which is stopping the window from working, he just left it uplugged and his still works fine.
Can't ask him for a few weeks what plug it is as he is on holidays right now, but you could maybe just unplug one at a time and see if you have any luck.
My mate actually stopped past work today and I asked him for more info on this fault.
Apparently there is a sensor on the rear tailgate to let you(or the window solinoid) know if it is fully closed or not which stops the function of the window.
He recons the plug for it is in the lefthand side trim panel and right in the corner.
Hope this helps.
Apparently there is a sensor on the rear tailgate to let you(or the window solinoid) know if it is fully closed or not which stops the function of the window.
He recons the plug for it is in the lefthand side trim panel and right in the corner.
Hope this helps.
Who is online
Users browsing this forum: No registered users and 27 guests