HJ60 engine mounts

[mongrel6660]

Hi all need some help , i have a 6/85 hj60 saraha 2H diesel.
i'm swapping a 2H in from a 4/84 hj60 but the chassis engine mounts on the passenger side are 20 mm furuther back in the 6/85 saraha.
can anyone offer any advice please

[lokka]

That sounds weird sure ya got it on the right way and the engin in all the way 20mm isnt far maby u could fudge it in as i cant see them being different ...

But il watch this one with interest as im about to fit a 2h from an early 80's (82 i think) into my 85 FJ60 were the 3f now sits ...

[Shadow]

the engine is definantly the same

swap mounts off the engine?

[Pyrotech]

you do know that the 2H does not sit straight in the engine bay??

the 2H runs on a slight diagonal from the front passenger corner back towards the drivers side,

im just wondering if u are trying to put the motor in straight?

i wasnt aware of this until i did an engine swap a few weeks ago, and noticed it before i pulled the motor out.

maybe thats the problem?

-Pyro

[mongrel6660]

Thanks for the help ,it was that the motor being on a slight angle had me buggered it just didt look right

stephen