Has anyone had an alternator burn out - stator- when using a 12v to 240V inverter in their vehicle?
I have an 800w unit used to drive angle grinders and drills, and shortly after its use my HD alternator died. Trying to get to the bottom of the failure. I have since had the stator rewound, just don't want to be doing damage to the new one. The inverter did cop a work out and was used fairly heavily across two days, probably 50% duty cycle, and did trip out a number of times due to current overload.
Cannot find any other fault with the charge circuit either.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Fried Alternator and 240Volt inverter use
Moderator: -Scott-
Who is online
Users browsing this forum: No registered users and 1 guest