Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear coils fall out

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 8
Joined: Thu Sep 01, 2005 5:20 pm

rear coils fall out

Post by harry29 »

Gday all I am after some advice/thoughts on how to retain my coils in the rear of a 130 defender. The coils and shocks are pedders 2" lift the front is good but the rear has no sway bar and with the long travel shock the coils will fall out (long range tank fitted cant put a sway bar in) can I tie them in with steel cable tied around the top mount and the axle with enough travel to utilise the full travel of shock.Can go to approx 560mm of travel before coils fall out . any advice is appreciated

Cheers Harry
Top
Posts: 512
Joined: Sun Jul 01, 2007 6:04 pm
Location: cairns

Post by defmec »

reinforce the bottom retainer as they will bend and use 2 pieces of 5mm 40mm 150mm flat bar for the top drill a hole 10mm in the middle of both bars allowing for a 50mm 8m bolt to go thru place one bar on top of the spring perch and the other thru the highest point of the coil ,bolt together
This is a block of text that can be added to posts you make
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

Image

these work well.

not hard to make.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

I have also seen people use straps that run inside the coils and attach top and bottom. These are made of webbing like seat belt material but are not as wide. The purpose of the strap is to limit axle droop rather than fix the spring in place.
Warn - Dont leave home without it
Top
Posts: 1097
Joined: Wed Feb 16, 2005 5:07 pm
Location: brisvagas

Post by def90 »

harry 29 you can still run sway bars, just have to drop the rear mount by 2" odd to clear the tank and obvioulsy fit longer bolts ;)

thats if you want to?
1986 - Stage 1 V8 serIII style side ute - gone
1997 - 300 TDI 130 single cab ute - gone
1986 - 90 defender soft top, bars, buttons and tyres
2000 - TD5 disco 'the boss's rig'
Top
Posts: 42
Joined: Mon Nov 01, 2004 1:16 pm
Location: N QLD

Post by hook »

HSV Rangie wrote:Image

these work well.

not hard to make.

Michael.
I'm runnig them on the bottom.

had to use fencing wire on the top to tie them in,
as the tops fell out on a trip (long Shocks),
wire is still there, 9 months
98 TDi Disco

N QLD
Top
Posts: 34
Joined: Sat Jan 19, 2008 9:44 am
Location: vic

Post by rod hodge »

i had the same problem with my rangie so i just got some 80 bump stops
and took the rubber off and mounted them
to the top spring hanger so it is like a cone and i haven had any probs since...
:cool:
Top
Posts: 59
Joined: Mon Sep 13, 2004 12:27 pm
Location: Melbourne

Post by 80rangie »

This appears to be a common problem.
I tied the tops in with hose clamps and have had no issues yet!
Top
Posts: 8
Joined: Thu Sep 01, 2005 5:20 pm

Post by harry29 »

Thanks for your thoughts/input I went with the tie them in with steel plate idea thanks Defmac will try it out this long weekend

Cheers
Top
Posts: 57
Joined: Thu Apr 27, 2006 7:56 pm
Location: Mackay, QLD

My long travel kit

Post by C.A.Moseley »

My long travel kit works very well. it uses relocation cones to relocate the springs as they return to the mounts. if you tie the springs in you are limiting travel. I made a set of top cones for my rangie with which i also run inch and a half coil spacers. springs pull away about two inches. Let me know if you guys are interested and I'll knock up a few sets. but remember to worki out your shock mount heights. The bigger the shock the bigger the closed length, so you need to raise the mounts to retain up travel
'78 2 door Rangie, 3.9L , 2" body, 4" long travel, 35s, rear locker, disco auto, caged. GQ 4.2 18psi, 5" lift, ARB lockers, 33s,
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 2 guests