Hey Guy's
Doing a budget build up and I'm at the stage where I need some diffs.
I can't afford mogs but I want strength.I'm going to be running a nice amount of HP [nothing crazy] and 44'' plus tyres.I'm sort of leaning towards GU or Dana at the moment. Any info would be muchly appreciated.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
NEED SOME DIFFS BUT DON'T KNOW WHAT TO BYE
Moderators: toaddog, TWISTY, V8Patrol, Moderators
NEED SOME DIFFS BUT DON'T KNOW WHAT TO BYE
Last edited by creepy on Wed Jun 03, 2009 3:38 pm, edited 1 time in total.
LOCKED,LIFTED AND LOADED
TORQUE'S CHEAP
TORQUE'S CHEAP
can't afford mogs but u got 44's, why?
Outers & Arms up stickers coming soon you hungry bitches!
http://www.myultimate4wd.com
http://www.myultimate4wd.com
GRIMACE wrote:How I miss the days of care free wheelin with the crews!
My advice would be to work out a budget and work out the best package for the $$. No point having 44's and gu's if you're going to brake them or have to sunday drive them - same said for hp too.
Big tyres don't offer any benefit besides looks - unless the whole drive train is up to the task.
You can break GU's with 37's no worries - I carried a spare RHS and LHS cv and axles (Brand new OEM ones at silly cost) on the truck - because its always in the back of your mind that they will break. That was with only 400 HP too.
To give you an Idea the buggy I'm building ATM I was advised to use a spool and 40 spline axles for the near 500hp I hope to make.
A 7200 housing would feature the following:
3.5” Race housing with full truss (upper/lower/back)
Currie 9” 3rd member with spool
CNC 6 piston calipers
Coleman vented rotors or Tubeworks blade rotors
2.5” Race hub
40 300M Spline TCS wasted body axles
About $8300.00
I am looking at this now as insurance against being stuck with broken gear, miles from home, wasted entry fees, and DNF.
Better buying D60's and shagged 35's and upgrade the tyres later.
regards,
Justin
Big tyres don't offer any benefit besides looks - unless the whole drive train is up to the task.
You can break GU's with 37's no worries - I carried a spare RHS and LHS cv and axles (Brand new OEM ones at silly cost) on the truck - because its always in the back of your mind that they will break. That was with only 400 HP too.
To give you an Idea the buggy I'm building ATM I was advised to use a spool and 40 spline axles for the near 500hp I hope to make.
A 7200 housing would feature the following:
3.5” Race housing with full truss (upper/lower/back)
Currie 9” 3rd member with spool
CNC 6 piston calipers
Coleman vented rotors or Tubeworks blade rotors
2.5” Race hub
40 300M Spline TCS wasted body axles
About $8300.00
I am looking at this now as insurance against being stuck with broken gear, miles from home, wasted entry fees, and DNF.
Better buying D60's and shagged 35's and upgrade the tyres later.
regards,
Justin
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Who is online
Users browsing this forum: No registered users and 161 guests