Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tailshft confusion

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 176
Joined: Wed Feb 04, 2004 12:18 pm
Location: licking windows

tailshft confusion

Post by slacker »

This is probably obvious to you guys, but which way does the rear tailshaft go on a 81 MQ diesel the fat part towards the gearbox or the diff???
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

on the GQ/GU the fat part goes towards the front but everyone swaps then around when they do a lift as it gives them extra clearance to the crossmember just behind the tx case.
seems to work no worries either way.
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Posts: 176
Joined: Wed Feb 04, 2004 12:18 pm
Location: licking windows

Post by slacker »

what about the weights on the tailshaft wont it cause axel bounce or vibrations at higher speeds turning it around.
Top
Posts: 98
Joined: Tue Apr 15, 2003 1:14 am
Location: Somewhere in Australia.......

Post by Goodsy »

slacker wrote:what about the weights on the tailshaft wont it cause axel bounce or vibrations at higher speeds turning it around.


No. It's balanced. :?
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

if it will fit , put the sl;ip joint to the diff end, less likely to get bent on things that way..
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

The factory fitted tailshafts on a MQ are placed with the slip joint close to the transfer on both the front and rear shafts.

Mods depending as to how you fit them up but it doesnt really seem to matter
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 4 guests