Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gq 4.2 diesel pump

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 1350
Joined: Tue Nov 25, 2008 4:48 pm
Location: Sunshine Coast - Brisbane

gq 4.2 diesel pump

Post by money_killer »

i have been searching for about 2 hrs now and had no luck.

need to turn down a pump that had a turbo on it gq and now the turbo is off so. need a diagram so know where this screw is u adjust.

thanks aaron
Top
Posts: 212
Joined: Tue Sep 07, 2004 9:28 am
Location: Panama, Central America

Post by Mario »

Rotative ?

http://www.outerlimits4x4.com/ftopic117 ... djust+td42
GQ TD42, OME 5" suspension, 3" bodylift, shimmed V6 Pathfinder LSD front, ARB rear, Safari snorkel, custom front and rear bumpers, Nissan 4.625 R&P, 37" MTRs.
Panama, Central America
Top
Posts: 1350
Joined: Tue Nov 25, 2008 4:48 pm
Location: Sunshine Coast - Brisbane

Post by money_killer »

thanks mate.

wat does rotative mean :oops:
Top
User avatar
JWB
Posts: 451
Joined: Sun Aug 24, 2003 5:48 pm
Location: Logan

Post by JWB »

money_killer wrote:
thanks mate.

wat does rotative mean :oops:
I presume Mario meant "Is it a rotory style" pump vs an
"inline style" pump. Although I'm not sure if any inline pumps were/are fitted to Australian released models.
cheers
JB
Top
Posts: 1
Joined: Mon Jun 08, 2009 8:29 pm
Location: SYDNEY

Post by Ron Burgandy »

Hey dude these GQ,s have a rotary pump and you really need to have a gauge to set them properly there are three nuts you need to loosen on the back of the timing cover that hold on the pump and then you twist the pump to adjust in relation to top dead centre
A dial indicator is needed with a long probe . this probe goes into the back of the pump in the centre ( A plug will have to be removed ) this will give you the position of the cam plate. the proper proceedure should be in the manual.
Hope it helps a little
Top
Posts: 212
Joined: Tue Sep 07, 2004 9:28 am
Location: Panama, Central America

Post by Mario »

JWB wrote:
money_killer wrote:
thanks mate.

wat does rotative mean :oops:
I presume Mario meant "Is it a rotory style" pump vs an
"inline style" pump. Although I'm not sure if any inline pumps were/are fitted to Australian released models.
cheers
Yeah .... rotary !
GQ TD42, OME 5" suspension, 3" bodylift, shimmed V6 Pathfinder LSD front, ARB rear, Safari snorkel, custom front and rear bumpers, Nissan 4.625 R&P, 37" MTRs.
Panama, Central America
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 4 guests