Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sierra Pitarm

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 138
Joined: Tue Nov 06, 2007 6:39 pm
Location: Noosa

Sierra Pitarm

Post by Dominator »

I have got a sierra with 1.6EFI including power steering with mercedies hi steer. when it was installed it was not straight so have good lock left but shit lock right. I am having a shit of a time trying to get the pit arm off the p.s box. would normaly just heat with the oxy but i dont want to wreck the seals in the p.s box. does any one have any help?
Tow Rig - 4.2 Turbo Deisel GQ. 5in coils, 2in body, f&r tube bars, sliders, 35's.

Comp Truck - Sierra, ute chop, G16B, 6.5 xfer, exo cage, 34 JT II's, 3/4 eliptical rear, SPOA, 2in body.
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

Mine is exact same. I have tried massive pullers. Hand Hydraulic puller and hammer to no conclusion.

If i get picky(which i do sometimes) i might cut the arm off the spline, or cut so it at least expands over the spline. And go buy a new one. Simple. :?
I am Tim
Top
Posts: 240
Joined: Sun May 13, 2007 9:05 pm
Location: Medowie

Post by ZUKPOWER »

get a bigger hammer?
Top
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

go to super crap or repco bursons ect and buy a pitman arm puller.
they are under $50 and you can't wreck the box.
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Top
Posts: 377
Joined: Fri Jan 06, 2006 4:03 pm
Location: Perth

Post by VR Rodeo »

ajsr wrote:go to super crap or repco bursons ect and buy a pitman arm puller.
they are under $50 and you can't wreck the box.
My stock pitman arm was too small for the ones supercheap sold so I ended up using a 3 jaw gear puller
'92 Rodeo - VR V6, T700, 31's
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
Top
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

super crap one fitted mine
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Top
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

I have broken 2 super cheap pitman pullers. I had to cut mine off with a dremal. Standard pitman arms can be very hard to find.
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Top
Posts: 146
Joined: Fri Oct 17, 2008 5:17 pm
Location: Cairns

Post by zookprojectfnq »

I have a standard pitman arm in the cupboard it any one wants it. Will have a 3" dropped sierra arm for sale soon when I do power steer
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

My tools werent just any super crap! Top industrial JBS 3 jaw hand hydraulic bearing puller! Still no budge!

Next will be a full hydraulic puller! Probably rip the whole shaft out of the box then! Fark!
I am Tim
Top
Posts: 138
Joined: Tue Nov 06, 2007 6:39 pm
Location: Noosa

Post by Dominator »

got it off last night. Used a 2 jaw puller got it nice and tight then using a old axle shaft as a drift gave the pit arm a couple of solid hits around the outside with a 1.5kg hammer. dropped straight off. I tried using a three jaw puller originaly but it would not pull straight so i gave up on that idea.
Tow Rig - 4.2 Turbo Deisel GQ. 5in coils, 2in body, f&r tube bars, sliders, 35's.

Comp Truck - Sierra, ute chop, G16B, 6.5 xfer, exo cage, 34 JT II's, 3/4 eliptical rear, SPOA, 2in body.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 36 guests