Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

H150 or H151 into 1hz 100 series?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 82
Joined: Wed Jul 21, 2004 6:54 pm
Location: west oz

H150 or H151 into 1hz 100 series?

Post by rowan »

G'day,

can someone tell me if it is a direct swap in to put a H150 into a 1hz 100 series? i.e same transfer case, clutch etc?

If i have my facts straight, the 1hz 100 series has an R151 box yeah?

A mate of mine has a 100 series 1hz with an aftermarket turbo, and he tows a camper trailer with it. I told him i don't know how many times before he bought it that the gearbox will shit itself, and lo and behold, it has. I've told him not to replace it with another R151, as it will only break again, and to get an 80 series box put in.

so is the H150 (or H151?) a simple bolt in?

cheers.
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

yes and no...the shifter is different 80 to 100, so a petrol h151 gearbox has the right shifter...and transfer if you want constant. You then need a diesel 80 bellhousing to bolt on and it becomes a turbo diesel box. OR a h150 from a diesel 80 and get a 100 shifter for it. If you run part time transfer, any transfer from an 80 will work, if it is constant, the shift motor from what you have will fit the 80 transfer, as the plugs are different....the biggest problem you will have is getting the right clutch spline. turbo diesel and petrol have the wrong spline, and the fix is a izuzu clutch plate worth $450....so the best option is later 80 h150 diesel gearbox and a 100 series petrol shifter (or rebend the 80 one)
The box will fit straight in, get tailshafts too as the 80 had larger unis....crossmember aswell just incase...5th gear in a h gearbox is lower than the r gearbox, so the motor will rev more in 5th...but you wont break it
Andrew
Confucious say...man who argue with idiot, worserer himself
Posts: 549
Joined: Sat Jul 23, 2005 5:33 pm
Location: Sunshine Coast

Post by Frankenyota »

Have a HZJ79 with blown R151 gearbox at work and wanted to know if i could replace it with a H15# box from a 75 cruiser?

The owner is pretty hard on the ute.
It is just a straight 1HZ no turbo with 300,000 on the clock or is it easier to go with a rebuilt R151?

Cheers
Matt
'83 dual cab lux, v6 auto, duals, RUF, crossova steering, IFS rears, 35" MTRS
2000 HZJ105 turbo with extras
Posts: 94
Joined: Fri Aug 13, 2004 3:38 pm
Location: Derby, Western Australia

Post by Sweeney »

The HZJ75 had the H55F gearboxes. I am not sure that the H55F will go into a 79 series easily, the tailshafts would be different lenghts.
Might be easier to use the H150/H151 from a part-time 4WD 80 series.
AWD is a poor excuse for a 4WD.
Posts: 595
Joined: Sat Nov 02, 2002 2:09 pm
Location: Blackbutt, Queensland

Post by v8zuki »

Frankenyota wrote:Have a HZJ79 with blown R151 gearbox at work and wanted to know if i could replace it with a H15# box from a 75 cruiser?

The owner is pretty hard on the ute.
It is just a straight 1HZ no turbo with 300,000 on the clock or is it easier to go with a rebuilt R151?

Cheers
Matt
use the turbo diesel box out of a hdj79 bolt straight in but a little pricey
FOR SALE hilux parts all models
have most parts available from early to late
call mick 0415156693
Posts: 134
Joined: Sat Aug 30, 2008 7:06 pm
Location: gold coast

Post by twocs »

excuse my ignorance but whats wrong with these gear boxes ?
105 series. Tough dog adj's, snorkel, drawers, IBS, MTZ's, bar, winch...
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

twocs wrote:excuse my ignorance but whats wrong with these gear boxes ?
I would ask the same thing given a mate of mine has been towing a 20ft van for years with his without drama yet this one has broke in front of a camper trailer.
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Post by LuxyBoy »

The R150 doesn't use a layshaft for 5th gear thus making it stronger. If you pull them apart the R151 has the 5th gear sort of tacked on the side like it was an after thought.
As with anything mechanical it comes down to use/abuse.
Kind Regards,
Brad
Posts: 549
Joined: Sat Jul 23, 2005 5:33 pm
Location: Sunshine Coast

Post by Frankenyota »

What is the box from a HDJ79 a R or H box?
'83 dual cab lux, v6 auto, duals, RUF, crossova steering, IFS rears, 35" MTRS
2000 HZJ105 turbo with extras
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

LuxyBoy wrote:The R150 doesn't use a layshaft for 5th gear thus making it stronger. If you pull them apart the R151 has the 5th gear sort of tacked on the side like it was an after thought.
As with anything mechanical it comes down to use/abuse.
So the issue would generate more from towing in 5th gear rather than the box overall???If so that would make some sense as he would be unlikely to be towing in 5th all the time with a 20ft van on compared to someone with a camper would could quite feasibily do so???
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Post by LuxyBoy »

fester2au wrote:
LuxyBoy wrote:The R150 doesn't use a layshaft for 5th gear thus making it stronger. If you pull them apart the R151 has the 5th gear sort of tacked on the side like it was an after thought.
As with anything mechanical it comes down to use/abuse.
So the issue would generate more from towing in 5th gear rather than the box overall???If so that would make some sense as he would be unlikely to be towing in 5th all the time with a 20ft van on compared to someone with a camper would could quite feasibily do so???
Exactly right, that is why you shouldn't tow with most vehicles using 5th gear regardless of weight being towed.
Kind Regards,
Brad
Posts: 82
Joined: Wed Jul 21, 2004 6:54 pm
Location: west oz

Post by rowan »

well in actual fact he only towed the trailer with it for a few thousand km before it broke. I think what contributed more to it's downfall was the fact that the previous owner put an aftermarket turbo on the 1hz long before my mate bought it.

correct me if i'm wrong, but i thought that the r-series boxes were just weaker in general than h-series - i.e not just the 5th gear.
Post Reply

Who is online

Users browsing this forum: No registered users and 54 guests