Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TD42 Manifold dimensions

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 7
Joined: Wed Jun 03, 2009 4:46 am
Location: Whakatane, Nw Zealand

TD42 Manifold dimensions

Post by hath »

Hi All,

Can any of you fine chaps tell me what are the measurements between all the top holes on the exhaust manifold are? The reason I ask is that I am about to get a flange laser cut so I can start my turbo conversion but I don't want to pull off my manifold until the new one is finished.

Thanks heaps,

Jamie.

ps. I tried to get a gasket to measure off but can't find a 1 piece one they all seem to be 6 individual gaskets!
Top
Posts: 603
Joined: Mon Nov 08, 2004 6:19 pm
Location: Mt Isa

Post by raptorthumper »

There is a dxf file in this thread. The TB45 and TD42 have the same manifold bolt pitch etc.

http://www.outerlimits4x4.com/viewtopic.php?t=86831
98 GU Patrol. 4.0L Barra, BF engine. 3" Lift. 85% Marks reduction Gears. 35x12.5x15 Maxxis Bighorns, 3" Zaust.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=86831&start=210
Top
Posts: 7
Joined: Wed Jun 03, 2009 4:46 am
Location: Whakatane, Nw Zealand

Post by hath »

brilliant, thanks very much
Top
Posts: 4
Joined: Sun Mar 15, 2009 10:48 am
Location: HALLAM

Post by Battletruckmat »

IF YOU HAVE NO LUCK LET ME KNOW AND I WILL TRACE ONE OUT AND POST IT TO YOU. THEN GET YOUR PLATE CUT FROM THAT
Top
Posts: 145
Joined: Wed Sep 27, 2006 4:13 am
Location: Abbotsford, BC, Canada

Post by canuck »

There is a DX file link for this on the last post of this thread: http://www.outerlimits4x4.com/ftopic70825-0-asc-30.php
Top
Posts: 7
Joined: Wed Jun 03, 2009 4:46 am
Location: Whakatane, Nw Zealand

thanks

Post by hath »

thanks heaps for your repleys, that DXF will work perfect!!
Top
Posts: 30
Joined: Sun Dec 23, 2007 4:44 pm
Location: Knox

Contact:
Contact Baalsgate

lasercut manifolds

Post by Baalsgate »

I actualy have a few laser cut manifold plates for the tb42 I made a few manifolds , if interested in a set of plates about $80 maybe cheaper than getting a single set cut.
Top
Posts: 480
Joined: Thu Jan 30, 2003 4:22 pm
Location: New Zealand

Post by KIWI »

Battletruckmat wrote:IF YOU HAVE NO LUCK LET ME KNOW AND I WILL TRACE ONE OUT AND POST IT TO YOU. THEN GET YOUR PLATE CUT FROM THAT
Was it you that makes manifolds?


Cheers
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 109 guests