Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
vn engine in hilux help!!!
Moderators: toaddog, Elmo, DUDELUX
vn engine in hilux help!!!
I want to put a vn v6 into my hilux its an 81 with the 18r in it and i alredy have the heavy duty 5 speed in it does eny one no it the vn auto motor will go to the 5speed ?????
Ring or email dellow, they make conversions for just about anything
(02)97744419 or
dellowauto@aol.com
(02)97744419 or
dellowauto@aol.com
need the series 2 vn motor to get a flywheel as the series 1 had a different crank for auto and manual but they standardised after series 2.
that being said i think CRS did a fly wheel for the series one motor at one point
that being said i think CRS did a fly wheel for the series one motor at one point
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Im here for the sausage!
series one motors had different cranks for auto and manuals as "hiluxmad" said, you should be able to see the difference as the newer ones had 8 bolts on the fly wheel and i think the old auto's had six, either way crs and marks 4x4 do a kit to change it over either way. you might have to look at a bit of the wiring side of things aswell depending on what your going to use it for(ie speed sensor).
Cheers Brad
Cheers Brad
if you can(and havent already bought a motor) get a series 2 vn/vp/vr motor as they are easyer to deal with in the long run eg s1 motor the thermostat is at the back of the motor and a right PITA.
cant remember if the manual on the series 1 had 8 bolts or not.
cant remember if the manual on the series 1 had 8 bolts or not.
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Who is online
Users browsing this forum: No registered users and 133 guests