im possibly buying a 253 for the lux soon, and was wondering if its possible to make a bellhouse to suit, just buy making up 2 flanges and filling the gaps with flatbar or something, ive seen someone on here do something similar with dual transfers, just wondering if anyone has done it before.
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Homemade Bellhouseing
Moderators: toaddog, Elmo, DUDELUX
While it is technically possible it would be fairly hillbilly. You also still need to be able to accurately machine the faces to align the gbox and motor. You're probably better off trying to get a bellhousing that fits the motor and making up a plate/adapter that allows to join the gbox on, you may have to cut the back of the original bellhousing and weld new plate on.
If you decide to do either of these, you will need to do a fair bit of measureing before anything. If you can get hold of an existing kit even to measure only, you would be in front....
If you decide to do either of these, you will need to do a fair bit of measureing before anything. If you can get hold of an existing kit even to measure only, you would be in front....
Show me the money..SHOW ME THE MONEY
Who is online
Users browsing this forum: No registered users and 2 guests