Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

trouble starting a 1hz 75

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 111
Joined: Tue Apr 28, 2009 9:24 pm
Location: rockhampton

trouble starting a 1hz 75

Post by stock.as.arock »

does anyone no wat the problem could be i went to drive out of my drive way off to a mates starts no problem got out of my drive way put it into second lost everything now power at all car stops i thought i must have run out of fuel i will try start it again and nothing come up when i turned the key no cd uhf dash light nothing car wont start and iv checked every fuse u can think off that i can find i still have lights and horn but nothing else so then i checked batrey everything was nice and tight nothing loose or should go wrong has anyone had this problem
Top
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

Put a multi meter on the battery and check what voltage.
And I'd start checking the fuseable links from the battery
Top
Posts: 111
Joined: Tue Apr 28, 2009 9:24 pm
Location: rockhampton

Post by stock.as.arock »

yer nothing wrong with it its still got 12.6v and iv checked all the fuses that i cna find but there is nothing wrong with any of them
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

loose terminal on battery, or alternator
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Post by Kitika »

I had the same thing happen in the jackaroo i'm driving at the moment it was the turbo timer, it had a loose connection/bad earth. Could be something like that if you have one installed.
More Suzuki parts going to the big Suzuki Heaven in the sky!
Top
Posts: 111
Joined: Tue Apr 28, 2009 9:24 pm
Location: rockhampton

Post by stock.as.arock »

nar there all good and i even put jumper leads on my car with me mates cruiser and still nothing and nar no turbo yet lol
Top
Posts: 72
Joined: Tue Oct 04, 2005 7:09 am
Location: wodonga

Post by roblrc »

Check the fusible links at the battery, looks like normal wire but has a push together terminal only a short distance from the battery post. Usual colours green, yellow or white, colour dictates fuse amperage.
Rob L
96 Dual fuel GXL 80 series
95 V8 ES Disco
Albury Wodonga
http://www.trailtrack4x4.com
Top
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

check the connection to the alternator
xxxx wrote:
:bad-words: :snipersmile:
Top
Posts: 111
Joined: Tue Apr 28, 2009 9:24 pm
Location: rockhampton

Post by stock.as.arock »

nar cant find anything like that all the wires are just wires the only fuse i got or connetion comming off my battery is my spotties and i also checked the connection to the alternator and its all good
Top
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

Ice wrote:check the connection to the alternator
There is a link in a black box in the engine bay, pull the alternator one out and bridge the connections, if that blows you have 0 power anywhere.

Theres usually 3 or so that look the same, along with the headlight etc fuses that look different, you want the ones that are square blocks, sometimes hard to tell if its blown, so just remove it and as i said bridge the 2 terminals that is plugs into.
BBP Offroad
Boondall Backyard Performance

They call me the MR. throw cash at shiz til its comp specccccc
Top
Posts: 48
Joined: Sun Jan 21, 2007 12:22 pm
Location: Woodford QLD

Post by cozzav8 »

chuck a jumper lead from negative terminal to engine block somewhere, sounds like bad earth
79 Series RV, 305 Mickey T's, 2" OME, 3" into twin 4" stacks, LOL, Love it
Top
Posts: 111
Joined: Tue Apr 28, 2009 9:24 pm
Location: rockhampton

Post by stock.as.arock »

i checked the black box and its working fine i tested the fuses and they are fine and i checked the earth with the jumper lead and that didnt work could it be a fryed wire or ingtion problem
Top
Posts: 214
Joined: Fri Jan 11, 2008 6:22 pm
Location: ACT

Post by crozza »

I HAVE HAD THE EXACT PROBLEM WITH MY 1HZ 75 SERIES.. TURN THE KEY AND DEAD AS A DOORNAILIUS....MINE WAS A SHITTY PLUG IN THE WIRING HARNES IN THE ENGINE BAY.. ITS LOCATED UNDERNEATH THE BATTERY AREA . THERE ARE 2 OF THEM. HAS AROUND 8 PINS IN IT. 1 WAS NOT PUSHED TOGETHER PROPERLY AND AS YOU HIT A BUMP IT KILLED THE ENGINE AND STARTER...

HAVE A LOOK AND SEE IF YOU CAN FIND THEM AND PULL THEM APART AND RECONNECT THEM AND IT MIGhT DO IT....

ONLY DIFFERENCE WAS MINE STILL HAD DASH LIGHTS ETC ..
Top
Posts: 111
Joined: Tue Apr 28, 2009 9:24 pm
Location: rockhampton

Post by stock.as.arock »

crozza wrote:I HAVE HAD THE EXACT PROBLEM WITH MY 1HZ 75 SERIES.. TURN THE KEY AND DEAD AS A DOORNAILIUS....MINE WAS A SHITTY PLUG IN THE WIRING HARNES IN THE ENGINE BAY.. ITS LOCATED UNDERNEATH THE BATTERY AREA . THERE ARE 2 OF THEM. HAS AROUND 8 PINS IN IT. 1 WAS NOT PUSHED TOGETHER PROPERLY AND AS YOU HIT A BUMP IT KILLED THE ENGINE AND STARTER...

HAVE A LOOK AND SEE IF YOU CAN FIND THEM AND PULL THEM APART AND RECONNECT THEM AND IT MIGhT DO IT....

ONLY DIFFERENCE WAS MINE STILL HAD DASH LIGHTS ETC ..


mate that sounded like it then i went out pulled my battery out but nothing under it so i looked around my engine bay near the battery the only thing i could find was a plug that held 11 wires i pulled that apart had a look looked fine put it back together but still nothing lol
Top
Posts: 99
Joined: Sat Feb 09, 2008 6:44 pm
Location: Blue Mountains NSW

Post by howesy »

I'm with cozzav8 get a good quality jumper lead and bight it to the block but on the battery make sure you bight the terminal post itself and not just the clamp. get your multimeter and see if the voltage reading on the positive clamp faulters when someone hits the crank. Clamps can show a connection and then drop out when loaded.
Doing this you eliminate one problem at a time instead of chasing your tail.
Top
Posts: 111
Joined: Tue Apr 28, 2009 9:24 pm
Location: rockhampton

Post by stock.as.arock »

yer tryed that howesy didnt show any voltage drop at all
Top
Posts: 214
Joined: Fri Jan 11, 2008 6:22 pm
Location: ACT

Post by crozza »

The plug i was refering to was under my second battery so its up near the firewall on the left side if you have a single battery....

[/img]Image
Top
Posts: 111
Joined: Tue Apr 28, 2009 9:24 pm
Location: rockhampton

Post by stock.as.arock »

[quote="crozza"]The plug i was refering to was under my second battery so its up near the firewall on the left side if you have a single battery....

yer thats the one i checked out but didnt seem to be the problem
Top
Posts: 214
Joined: Fri Jan 11, 2008 6:22 pm
Location: ACT

Post by crozza »

no dramas....good luck with it
Top
Posts: 111
Joined: Tue Apr 28, 2009 9:24 pm
Location: rockhampton

Post by stock.as.arock »

thanks for ya help fellas but i found out wat it was it was a fryed wire just off the battery
Top
Posts: 243
Joined: Thu Jul 15, 2004 9:21 am
Location: Townsville

Post by Dane »

Sounds like the fusible link as they boys were referring to above. They blow for a reason, you must have another fault that caused it to blow.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests