Just wondering how hard/whats involved in converting a carb 4g54 Astron to EFI. Is it as simple as finding a EFI motor and swapping the EFI gear over, or is there obsticals to be overcome?
I have found a donor vehicle ( a 1994 Magna thats EFI and Manual) and from what I understand the 2 motors are the same, it should be as easy as unbolting the EFI manifilds from the magna, taking all the required sensors and garbage and fitting it to the pag, power up the computer and Wah-La, EFI pag.
Would I be better swapping the whole motor?
Will the FWD engine bolt to the 4WD G/Box?
Will the inlet manifold need to be spun around? does it point the wrong way?
Any help and answers would be greatly appreciated, i am really just chasing better fuel economy on highway, will this make massive difference or should I just keep it simple carb???
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Injecting a 4g54 Astron in NB Pajero
Moderator: -Scott-
Hi phat!
Check out sigma-galant.com - there's a lot of posts there on EFI'ing the Astron, including a lengthy post by one of our members who converted his Gen 1 Paj. If you can make our search function work, there may be some links somewhere here.
Issues:
Depending on Astron version, the inlet manifold stud pattern may not suit.
The Magna head has different cooling ports to earlier Astron heads, so coolant flows need some attention. There's a few different solutions.
The throttle body will point into the firewall - it's a relatively simple cut and shut routine to put it on the other end.
The Magna plenum chamber may need to be shortened to fit under your bonnet.
You'll need an EFI fuel pump, and (for a 4wd application) you should use a lift pump & surge tank.
There's masses of other small things to deal with - so deal with them.
I converted my Sigma. The economy still isn't fabulous, but it's definitely better than carby. I also suspect I have camshaft & or ignition timing issues, but that's another story.
Just do it!
Scott
Check out sigma-galant.com - there's a lot of posts there on EFI'ing the Astron, including a lengthy post by one of our members who converted his Gen 1 Paj. If you can make our search function work, there may be some links somewhere here.
Issues:
Depending on Astron version, the inlet manifold stud pattern may not suit.
The Magna head has different cooling ports to earlier Astron heads, so coolant flows need some attention. There's a few different solutions.
The throttle body will point into the firewall - it's a relatively simple cut and shut routine to put it on the other end.
The Magna plenum chamber may need to be shortened to fit under your bonnet.
You'll need an EFI fuel pump, and (for a 4wd application) you should use a lift pump & surge tank.
There's masses of other small things to deal with - so deal with them.
I converted my Sigma. The economy still isn't fabulous, but it's definitely better than carby. I also suspect I have camshaft & or ignition timing issues, but that's another story.
Just do it!
Scott
Who is online
Users browsing this forum: No registered users and 0 guests