Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How much do your sliders flex / how much clearance to body?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
CT
Posts: 54
Joined: Thu Jul 15, 2004 6:54 pm
Location: Central Queensland

How much do your sliders flex / how much clearance to body?

Post by CT »

I've got some pretty beefy designs in my head but as even the most over-engineered things can flex, how much clearance do people allow beween their sliders and their sills?

I don't want to leave 10mm and find out later the hard way that 20mm would have saved me some dings.

Cheers
Craig
Top
Posts: 419
Joined: Mon Jul 02, 2007 8:00 pm
Location: Emerald vic

Post by KYSI »

mines about 10 mm
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Mine has about 6mm. Who cares if they crush the sills a bit it's only a Zook!!!
Top
CT
Posts: 54
Joined: Thu Jul 15, 2004 6:54 pm
Location: Central Queensland

Post by CT »

want33s wrote:Who cares if they crush the sills a bit it's only a Zook!!!
Noooo! I hate panel damage!!
Top
Posts: 103
Joined: Thu Nov 13, 2008 2:44 pm
Location: Brisbane

Post by Big_DP »

Noooo! I hate panel damage!!
You going to miss the best part of 4wding!!!
I'm just raising my post count


I hate emoticons :grab:
Top
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

Mine are about 20mm from the pinchweld, and about 50mm from the sill itself roughly, could measure it if you need
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Mine are ~5mm from the body, but have 0 flex.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 207
Joined: Tue Oct 05, 2004 7:52 pm
Location: Italy

Contact:
Contact Michele

Post by Michele »

Ditto :D
M
D90 Tdi The Cube II ©
www.whitedogrover.com
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

I had some that were 0mm :armsup: They were great and I'll do it again depending upon the vehicle and if it suits.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

Mine are a few mm from the seam, good ones should have minimal or no movement, that also depends how hard you come down on something.
BBP Offroad
Boondall Backyard Performance

They call me the MR. throw cash at shiz til its comp specccccc
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

Mine mount ONTO the body - maximum clearance and have zero flex/movement. :D
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 885
Joined: Wed Jun 30, 2004 9:45 pm
Location: Maroochydore, sunshine coast

Post by spamwell »

mine sit up against the sill, no flex in them
Top
CT
Posts: 54
Joined: Thu Jul 15, 2004 6:54 pm
Location: Central Queensland

Post by CT »

Thanks all.

I'll see how I go with the bender this weekend. The shop sent the wrong former, so it will be test work only until I can track down a small radius former.

Cheers
Craig
Top
Posts: 1350
Joined: Tue Nov 25, 2008 4:48 pm
Location: Sunshine Coast - Brisbane

Post by money_killer »

there should be NO FLEX.
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

There will always be flex, either on the mount, through the slider or though the mating surface.

Even sliders welded to the chassis flex the chassis.

TJ style sliders flex too, but you don't know or realise it as its hard to see.

Any steel that does not flex will crack.
Top
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Post by mudmacaca »

Big_DP wrote:
Noooo! I hate panel damage!!
You going to miss the best part of 4wding!!!
Good on ya I rekon if ya aint got panel damage you aint tryed anything hard enough to get the blood pumping.
Hey take it to the limits and beyond
If you dont have panel damage you ain't trying hard enough
Top
Posts: 721
Joined: Sun Apr 24, 2005 3:01 pm
Location: on top of a large pile of rocks

Post by AFeral »

The slider will move slightly as the chassis will will twist a bit.
The other option is to notch the sills allows for more clearance.
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Top
Posts: 419
Joined: Mon Jul 02, 2007 8:00 pm
Location: Emerald vic

Post by KYSI »

nastytroll wrote:There will always be flex, either on the mount, through the slider or though the mating surface.

Even sliders welded to the chassis flex the chassis.

TJ style sliders flex too, but you don't know or realise it as its hard to see.

Any steel that does not flex will crack.
x2
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 98 guests