im thinking of buying the lra kit . has anyone fitted it before is it easy to do youreself or give it to a workshop. sUSPENTION KIT for 86 model clasic range rover
BODY LIFT KIT NOT SUSPENTION
steve
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
lra suspention kit
Moderator: Micka
lra suspention kit
Last edited by bluerangie on Thu Jun 25, 2009 7:36 pm, edited 2 times in total.
G'day mate,
I'm taking it that you are looking at fitting the 2.5" Body Lift kit???
I've got a 1997 Discovery that I fitted the Body Lift and long travel suspension to myself. It's not hard at all, just a little time consuming and a little patience required, I used 2 jacks, supported both of the sills with wood and jacked both sides up slowly. It comes with full instructions that are easy and straight foward to follow you can view them on the internet. http://www.lrautomotive.com.au/contents/en-us/d682.html
But if you all and talk to Andrew ( 03 9464 4094 ) I'm sure he will give you the run down on it all. They are a great mob of blokes to deal with and would suggest to anyone to use them!
I'm taking it that you are looking at fitting the 2.5" Body Lift kit???
I've got a 1997 Discovery that I fitted the Body Lift and long travel suspension to myself. It's not hard at all, just a little time consuming and a little patience required, I used 2 jacks, supported both of the sills with wood and jacked both sides up slowly. It comes with full instructions that are easy and straight foward to follow you can view them on the internet. http://www.lrautomotive.com.au/contents/en-us/d682.html
But if you all and talk to Andrew ( 03 9464 4094 ) I'm sure he will give you the run down on it all. They are a great mob of blokes to deal with and would suggest to anyone to use them!
"Insert Signature Here"
Holy macoroni and cheese batman!!! $790 for a body lift?!??!!?
Did my 80mm lift for for about $130! nice kit but still.
Its not that hard just make sure you remember to unbolt everything before lifting body. Best way to lift body is undo all bolts first then lift 1 side at a time a lot safer and less chance of misalignment.
Did my 80mm lift for for about $130! nice kit but still.
Its not that hard just make sure you remember to unbolt everything before lifting body. Best way to lift body is undo all bolts first then lift 1 side at a time a lot safer and less chance of misalignment.
I have both of these kits in the bob tail and have no complaints , I think they are both well engineered and designed.
The body lift is easy enough to fit , just take your time and all will be good. The same goes with the suspension kit , easy enough to fit and gives good results.
Cheers
Braudy
The body lift is easy enough to fit , just take your time and all will be good. The same goes with the suspension kit , easy enough to fit and gives good results.
Cheers
Braudy
V8 beats gravity
If you cant buy it , Make it !
Bob tail Rangey
If you cant buy it , Make it !
Bob tail Rangey
Who is online
Users browsing this forum: No registered users and 31 guests