Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 sway bar, is it needed?????

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 205
Joined: Sat Jun 28, 2008 3:55 pm
Location: South Brisbane

60 sway bar, is it needed?????

Post by phil94delica »

Hey ppls.

I just bought a 62 cruiser a week ago and it has a front sway bar.
Is it really needed on a truck with leaf springs??

It has a 2h so its slow anyway and doesnt handle so has anyone removed the front sway bar?? and how did it drive arterwards???

Thanks for any info, Phil.
Electrical !!!
www.philthesparky.com.au

Offroad Photography !!!
www.offroadphotography.com.au
Posts: 244
Joined: Mon Jun 23, 2008 7:37 am
Location: Clarence Valley NSW

Post by KUSTOMV840 »

If your not powering along around corners on a race track you dont need the sway bar. Look at all the leaf sprung 4x4s around, no swaybars.. It will give you heaps better flex too.
Posts: 206
Joined: Wed Oct 05, 2005 9:10 am
Location: Ulmarra n.s.w

no swaybar

Post by brendan rooke »

Ive had a few 60s now and the first thing i do is remove the sway bars.
if your running adjustable shocks they are fine if you dont drive it like i drive my v8 calais.

I had an 85 hj60 with 2" springs, 3" body lift and extended shackles running 35" bias ply claws, i put in a set of brand new pro-comp es9000 shocks and it handled suprisingly good.

I just had to adjust my driving style after getting out the commy. :D
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

I always thought sway bars were a good idea - so much so that I put a thicker front bar on my 60 and was in the process of installing a rear bar. I ripped the sway bar from the drivers side mount when doing a rough track one day. Left it off and didn't notice the difference so it has never been back on. That said I have Bilstein shocks that I believe transform the handling making sway bars unecessary. I think the key is to have good shocks.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Posts: 205
Joined: Sat Jun 28, 2008 3:55 pm
Location: South Brisbane

Post by phil94delica »

Thanks for the replys.

I have a falcon thats lowered a bit and has 17's on it so if I want to go around corners I just drive that .

The cruiser has 3" efs springs and rancho shocks and its all less then 2 yrs old so Ill ditch the sway bar and see how she goes.
Electrical !!!
www.philthesparky.com.au

Offroad Photography !!!
www.offroadphotography.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest