Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Whats this ball from? Hilux Gearbox

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Whats this ball from? Hilux Gearbox

Post by Weiner »

Hi guys,

Pulled the gearbox off the bellhousing, and out popped this ball bearing.

For the life of me I can't figure out where it goes.

Anyone have any ideas, it came out of whats in the background.

Image
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

No idea, but it's probably meant to have a spring behind it and makes something click ;)

Maybe that notched shaft on the right?
Tetanus rolling on 37's
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

dogbreath_48 wrote:No idea, but it's probably meant to have a spring behind it and makes something click ;)

Maybe that notched shaft on the right?
Can't find anywhere it will sit.

Have noticed a spring thing in the other half of the case it would go into but not sure how the spring would sit with it
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 93
Joined: Mon May 18, 2009 9:44 pm
Location: mornington

Post by kane077 »

Where that notched shaft goes thru the housing there should be an allen key plug that you can remove. Take the plug out and behind that there should be a spring. So when it goes back togather you put the cases together then fit the ball first then the spring then fit the plug.
Peninsular Diesel Repairs
59 788 400
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

kane077 wrote:Where that notched shaft goes thru the housing there should be an allen key plug that you can remove. Take the plug out and behind that there should be a spring. So when it goes back togather you put the cases together then fit the ball first then the spring then fit the plug.
Champion, thought so but wanted to make sure :armsup:
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 93
Joined: Mon May 18, 2009 9:44 pm
Location: mornington

Post by kane077 »

Too easy mate!
Peninsular Diesel Repairs
59 788 400
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests