Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Project "NO MONEY"

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 838
Joined: Wed Apr 28, 2004 10:00 pm

Project "NO MONEY"

Post by Wesley »

Well its come time to pull my finger out and get my hardtop going again so i can have some fun in it, This isnt going to be a full on rock crawling machine just something to take out and have fun in that wont cost me bugger all.

OK so plans so far are

Welded front,rear diffs
Spring over with YJ's already got the stuff sitting there
31's for now
stock 1.3 with stock gearing as i dont see the point on spending more than the car cost me for gears though i might make a drop box later.
fix the body up as its been rolled on the bitchumen :D
dont know if i should tube the front or not as the panels are stuffed but they look :cool:
will make all my own bar work
Getting painted hammertone gunmetal gray
1/2 doors as my windows have been smashed so theres no point for full ones :D
anyone got any other ideas that wont cost me anything? its not regod so anything goes.


Image

Image
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

fab a snorkel, strengthen the diff housings, move the perches out to stretch the wheelbase, can you get a 2nd gbox and go twin sticks to correct your gearing instead of buying new gears???

I like the body as intact as possible... dont forget how muddy everything will get if you leave it open!

How are you addressing the steering?

It'd be cool to make it a trayback by taking out the middle section and moving the rear door behind the seats =P then you wont get any scrubbing on the rear wheel arches - cos they wont exist! haha
The worst thing about censorship is ███████.
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Cage

Dovetail the rear

dont trayback it. if u need space for uptravel, create some wheel tubs from sheet inside the hardtop.

depending on where your wheeling, lookout for a 1L box and NT 3.9 ratios for the diffs, same as i have
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}

Post by Santos »

more like PROJECT "Average-Suzui-Owner"

i say cut out the roof and to make it into a FunTop Sunroof :armsup:
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Top
Posts: 838
Joined: Wed Apr 28, 2004 10:00 pm

Post by Wesley »

Santos wrote:more like PROJECT "Average-Suzui-Owner"

i say cut out the roof and to make it into a FunTop Sunroof :armsup:
I already have a softtop for the road, this is just a thrasher and i didn't think you were meant to cut hardtops because it weakens them to much?
Top
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Post by Turbo Tonka »

strengthen wherever you weaken it from cutting,problem solved but in saying that id leave it as is and just go nuts.If you dont care about the body damage leave it as is.Looks like a fun little project,A bit lower gearing and with the welded diffs will be :cool:

matt
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Top
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

no rego & no comp specs?

easy.



Image

Image

Do a link setup yourself, move the tank & stretch it right out, weld up a front x-member to take a winch & power steer box.

lose the front clip & cut the rear.
All the gear, No idea...
Top
Posts: 838
Joined: Wed Apr 28, 2004 10:00 pm

Post by Wesley »

Would go coils but i already have a set of yjs sitting at home so id prefer to use them, i also have springs to go 3/4elip but the yjs should flex good without it so i dont know if i should use them or not. i do like the bar work on the front of that and my front clip is alot worse than it looks in the pic so i might make up something like that.
Top
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

alien wrote:How are you addressing the steering?
X2
I cannot see this happening with "no money"...
Wheeling on completely wicked angles, without even looking stable.
Top
Posts: 838
Joined: Wed Apr 28, 2004 10:00 pm

Post by Wesley »

Highway-Star wrote:
alien wrote:How are you addressing the steering?
X2
I cannot see this happening with "no money"...
I will spend money im just not going to go crazy
Top
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

Wesley wrote:
Highway-Star wrote:
alien wrote:How are you addressing the steering?
X2
I cannot see this happening with "no money"...
I will spend money im just not going to go crazy

Thats good to hear.
Wheeling on completely wicked angles, without even looking stable.
Top
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

U tight bastard, having those tyres on got u motivated huh?
U put in my locker for me - i give you a 1ltr T-case :finger:
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

mrRocky wrote:U tight bastard, having those tyres on got u motivated huh?
U put in my locker for me - i give you a 1ltr T-case :finger:
i.ll put ur locker in for that thou i wont garantee it will work ok :).
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 838
Joined: Wed Apr 28, 2004 10:00 pm

Post by Wesley »

mrRocky wrote:U tight bastard, having those tyres on got u motivated huh?
U put in my locker for me - i give you a 1ltr T-case :finger:
The tyres and all this wet weather im missing so much action!!!! but i have this feeling tomorow will be my last day off work for the next month :cry: what locker did you get?
Top
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

Powertrax lockright, apparently there easy as you dont need to completely dissasemble the diff. :lol:
I will be ordering the 6.5.1 trans gears soon i got a good deal $800 a pop if your keen.
Top
Posts: 120
Joined: Thu Feb 07, 2008 7:53 am
Location: Chur Bay, New Zealand

Contact:
Contact Mudbits

Post by Mudbits »

Hey Dee, do you have the link to the build thread of the blue Jeep or somewhere for build info?
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

Mudbits wrote:Hey Dee, do you have the link to the build thread of the blue Jeep or somewhere for build info?
On the one hand I ought to slap you with my cawk for calling it a Jeep........But on the other hand I'm in a good mood. :D



Not so much a build up page but it has a fair few pics.
http://pirate4x4.com/forum/showthread.p ... of+sliders
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests