Flares (pics of giant racing items fitted?)

[MONGREL]

I know flare's would have been covered heaps of times.

I would like to find about these in particular.


Anyone know anything about them?

[bogged]

I know flare's would have been covered heaps of times.

I would like to find about these in particular.


Anyone know anything about them?

Thats overseas.
Giant racing make a set similar think $800 pr.

[SIM79]

Gaintracing sells them.

Originally Posted by giantracing
i have the moulds and can make you a pair of ice lantic flares for a gu about 5 ' wide. can fit huge offset wheels on. also for any body else i do GQ icelantic flares and GQ guards as well.

GU FLARES -$ 750 PAIR
GQ FLARES -$ 650 PAIR FRONT
GQ FLARES -$ 500 PAIR REAR
GQ FRONT GUARDS-$ 750 PAIR
Custom 4wd Creations Brisbane
0438279890

[MONGREL]

Anyone got Giant Racing Flare's, and can post up some pics?

[bogged]

Anyone got Giant Racing Flare's, and can post up some pics?

thats what they look like in your pics.

[MONGREL]

Actually i have the giant racing one's, they look similar. But pretty different.
The one's in that pic im sure are a type of plastic flare, (similar to waht factory ones are made from) giant are a fiber glass flare. The flare's in the pic look to me like they open up the guard more, plus they dont run back to the oringinal line of the guard for mounting. Open underneath, not dual skinned, or closed in, hard to explain.
Mine are turning toward the tyre on the bottom edge, no matter how hard i try to move it, it just dosen't look right. It kicks in.
I know i have to cut the bottom back edge of the front gaurd to fit them as they have a dish in there to help clear large tyre's. And i have done on one side.
But im not keen to keep cutting when the rear's that dont require gaurd cutting dont seem to line up.

So if anyone has info on the type in the pic, im sure someone in oz would make them.
Or some pics of giant racing items fitted so i can see how they have fitted for others, and if they had to trim the flare itself. (been told it should not be needed)
Would be appreciated.

[jessie928]

Fibreglass Replacement Panels
42 High Street, Kippa-Ring,
Queensland, 4021
Australia

they are about 900 a full set,

JEs

[vn15]

I know flare's would have been covered heaps of times.

I would like to find about these in particular.


Anyone know anything about them?

These fibre glas flares are made in Norway, A bit different to the one made in Iceland, I have an Icelandic flare-set mounted on my GQ.

[SIM79]

Fibreglass Replacement Panels
42 High Street, Kippa-Ring,
Queensland, 4021
Australia

they are about 900 a full set,

JEs

I contacted them and they told me they don't make wide flares for a GQ.

Below are Gaintracing front flares.

Here are some better pics although this is on one of Chris's utes running trimmed guards and 14.5" x 37" rubber (this truck is for sale so keep an eye on for sale section or ring Chris. Is GU diffs, chassis, twin tanks, turbo diesel, etc everything brand new, etc)

[MONGREL]

Fibreglass Replacement Panels
42 High Street, Kippa-Ring,
Queensland, 4021
Australia

they are about 900 a full set,

JEs

I contacted them and they told me they don't make wide flares for a GQ.

Below are Gaintracing front flares.

Here are some better pics although this is on one of Chris's utes running trimmed guards and 14.5" x 37" rubber (this truck is for sale so keep an eye on for sale section or ring Chris. Is GU diffs, chassis, twin tanks, turbo diesel, etc everything brand new, etc)


Thanks for the pics, mine came in fibreglass replacement panels box.
And i cntacted the bloke you are posting/promoting.

Edit: Think i will sell mine, $1000. painted gloss 2 pack black. I dont like the way they sit.

[bogged]

Edit: Think i will sell mine, $1000. painted gloss 2 pack black. I dont like the way they sit.

Im seriously shocked people would consider paying anywhere close to 1/2 that for a pr of fiberglass flairs! I'd be selling mine too!!

[MONGREL]

2 pair mate, yeah not cheap but not alot of options. (legal one's)

[84mksd33t]

i got 5" wrangler flares booty fabbed to my MK shorty...





37x13.5 on big offset 15x10s [/list]

[muzz82]

i must admit i dont mind the look of those flares in mongels pic, anyone no where to get a set, also does anyone have pics of the giant racing flares for the rear of a wagon??

[poppeye]

i got 5" wrangler flares booty fabbed to my MK shorty...





37x13.5 on big offset 15x10s [/list]

No one gives a toss about your heap of shit mk with dodgy flares this post is about the giant racing flares

[SIM79]

No one gives a toss about your heap of shit mk with dodgy flares this post is about the giant racing flares

Is someone jealous .

[SIM79]

i must admit i dont mind the look of those flares in mongels pic, anyone no where to get a set, also does anyone have pics of the giant racing flares for the rear of a wagon??

hey sorry people just saw this posti put some photos up for the GQ ones.
also fibreglass guards for GQ only with snorkle on lh side. non of the GU ones sorry, and i only do for a ute. so you can cut guard and put up to 38 tyres on. i have a set on a ute now with 37 tyres.... thank you.

[MONGREL]

i must admit i dont mind the look of those flares in mongels pic, anyone no where to get a set, also does anyone have pics of the giant racing flares for the rear of a wagon??

hey sorry people just saw this posti put some photos up for the GQ ones.
also fibreglass guards for GQ only with snorkle on lh side. non of the GU ones sorry, and i only do for a ute. so you can cut guard and put up to 38 tyres on. i have a set on a ute now with 37 tyres.... thank you.

I too want to see some rear one's fitted.
Think you can get those pics bigger?? 3 x bigger would be good..
I have some, but they came from someone elses truck. The bloke i bought the flares from emailed them, but they are all close up angled shots of the rear ones, no straight on shot from the side so you can see exactly how they sit.

[84mksd33t]

No one gives a toss about your heap of shit mk with dodgy flares this post is about the giant racing flares

[SIM79]

i must admit i dont mind the look of those flares in mongels pic, anyone no where to get a set, also does anyone have pics of the giant racing flares for the rear of a wagon??

hey sorry people just saw this posti put some photos up for the GQ ones.
also fibreglass guards for GQ only with snorkle on lh side. non of the GU ones sorry, and i only do for a ute. so you can cut guard and put up to 38 tyres on. i have a set on a ute now with 37 tyres.... thank you.

I too want to see some rear one's fitted.
Think you can get those pics bigger?? 3 x bigger would be good..
I have some, but they came from someone elses truck. The bloke i bought the flares from emailed them, but they are all close up angled shots of the rear ones, no straight on shot from the side so you can see exactly how they sit.

These are the biggest pics Gaintracing could supply when I made inquires.

[MONGREL]

Giant sent me these,

[muzz82]

they dont look to shabby at all in those pics, are they designed on the gq for the guards to be cut to allow for bigger tires or are they to fit a standard wheel arch??

[scmick]

I know flare's would have been covered heaps of times.

I would like to find about these in particular.


Anyone know anything about them?

Some of the imported gq shortys are fitted with these, dont know if they were factory or not

[MONGREL]

Ok, so now i know more about em, thanks for the pics, anyone know how i can go about getting my hands on a set of those ones in particular? (overseas version) would be greatly appreciated

[SIM79]

Ok, so now i know more about em, thanks for the pics, anyone know how i can go about getting my hands on a set of those ones in particular? (overseas version) would be greatly appreciated

Arctic trucks sells them but they will cost more than double gaintracing flares by the time you get them here.

[MONGREL]

they dont look to shabby at all in those pics, are they designed on the gq for the guards to be cut to allow for bigger tires or are they to fit a standard wheel arch??

You need to cut a small triangle part out at the bottm rear corner of the front guards, where large tyre's tend to rub. Is incorparated in the flare design.
Apart from that, remeve factory flare's and screw these one's on.

[MONGREL]

Ok, so now i know more about em, thanks for the pics, anyone know how i can go about getting my hands on a set of those ones in particular? (overseas version) would be greatly appreciated

Arctic trucks sells them but they will cost more than double gaintracing flares by the time you get them here.

Ok, thanks.

[muzz82]

they dont look to shabby at all in those pics, are they designed on the gq for the guards to be cut to allow for bigger tires or are they to fit a standard wheel arch??

You need to cut a small triangle part out at the bottm rear corner of the front guards, where large tyre's tend to rub. Is incorparated in the flare design.
Apart from that, remeve factory flare's and screw these one's on.

What about the rear end??

[MONGREL]

they dont look to shabby at all in those pics, are they designed on the gq for the guards to be cut to allow for bigger tires or are they to fit a standard wheel arch??

You need to cut a small triangle part out at the bottm rear corner of the front guards, where large tyre's tend to rub. Is incorparated in the flare design.
Apart from that, remeve factory flare's and screw these one's on.

What about the rear end??

No cutting on rear needed.

[Fglass]

[quote="MONGREL"]Giant sent me these,


I have a set of these at work on loan I am going to mould soon. They will be about $650 for the full set including the rubber.

Cheers Jase.