Great Jeff! I think there are 3 of us WAers in thr group buy?jbell wrote:Yeh Ben I would be keen to freight together to try to
keep the cost down.. just got to pull it out 1st.
Jeff
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Group Buy: Maxi Xfer Gears **HOLY FARK - THERE'S 10**
Moderator: Micka
Thanks buzz66 - sent him an email.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Pm sent Grimy.
Warren told me, that while he would prefer people to send the low range gears in as well as the intermediate gears, you can measure them yourself if you are 100% sure you can tell the difference.
Low Range Gear Dog Teeth:
2 types - WIDE and NARROW
When looking downwards onto the top of the dog teeth:
Wide Teeth should have flat tips
Wide Teeth should have a root/base thickness of 2.6mm
Narrow teeth should have pointed tips
Root thickness should be <2.6 mm - but Warren didn't give me what the measurement should be.
Warren told me, that while he would prefer people to send the low range gears in as well as the intermediate gears, you can measure them yourself if you are 100% sure you can tell the difference.
Low Range Gear Dog Teeth:
2 types - WIDE and NARROW
When looking downwards onto the top of the dog teeth:
Wide Teeth should have flat tips
Wide Teeth should have a root/base thickness of 2.6mm
Narrow teeth should have pointed tips
Root thickness should be <2.6 mm - but Warren didn't give me what the measurement should be.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Fantastic! Thanks Micka!nottie wrote:Micka is all over that BenISUZUROVER wrote:Has someone contacted Keith Kreuzer from ROvertracks to see if he is still in??? I imagine he will need to call up and pay by CC?
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
I was first to pay a deposit and also the first to give up and pay retail price.
I have paid the full amount, and the INT gear is already back and ready to go in with the new gear set.
Sorry couldn't wait for the remaining Tyre kickers to cough up. My VC is starting to howl bad now.
I imagine MR will still include me as part of the 10 but I haven't asked.
All the best trying to get it together boys. See ya in the bush.
I have paid the full amount, and the INT gear is already back and ready to go in with the new gear set.
Sorry couldn't wait for the remaining Tyre kickers to cough up. My VC is starting to howl bad now.
I imagine MR will still include me as part of the 10 but I haven't asked.
All the best trying to get it together boys. See ya in the bush.
Ok just to inform you on whats goin on guys. I beleive we have a total of 6 units paid for to date.
buzz66 30% PAID in full cause we were all to slow
Micka 49% PAID
Grimace 49% PAID
jbell 49% PAID
halfshaft 30% PAID
isuzurover 30% PAID
revor 49% - Micka is sorting out payment for this
Matman 30% pulled out
Goldrover 49% bought elsewhere and not included in group buy
I really think we need to get another party or two onboard to put forward some more numbers to Warren at MR (remember initially we needed 10 minimum).
So anyone who is running larger tyres that should be looking at gear reductions should be notified about this group buy and looking to equip thier vehicle with some tcase reduction.
Cmon, remeber your not cool unlees you have one
buzz66 30% PAID in full cause we were all to slow
Micka 49% PAID
Grimace 49% PAID
jbell 49% PAID
halfshaft 30% PAID
isuzurover 30% PAID
revor 49% - Micka is sorting out payment for this
Matman 30% pulled out
Goldrover 49% bought elsewhere and not included in group buy
I really think we need to get another party or two onboard to put forward some more numbers to Warren at MR (remember initially we needed 10 minimum).
So anyone who is running larger tyres that should be looking at gear reductions should be notified about this group buy and looking to equip thier vehicle with some tcase reduction.
Cmon, remeber your not cool unlees you have one
CDB wrote:Is the deal done on the Maxi-Drive gears?
If not:
Any idea how much to ship to the States?
Could I just buy the gears and install them later without tearing down my t-case now or do the gear mods need a special machining.
I'm new to the forum and was drawn from the D90 list because I need to either lower my RRC diff gear ratios or use the T-case mod and that has some advantages.
Thanks,
Clark
Has anybody heard from CDB about this?
Got another participant from AULRO.
IceFyre, is going to notify me once deposit is done.
Current list;
buzz66 30% PAID in full cause we were all to slow
Micka 49% PAID
Grimace 49% PAID
jbell 49% PAID
halfshaft 30% PAID
isuzurover 30% PAID
revor 49% - Micka is sorting out payment for this
IceFyre (AULRO)
IceFyre, is going to notify me once deposit is done.
Current list;
buzz66 30% PAID in full cause we were all to slow
Micka 49% PAID
Grimace 49% PAID
jbell 49% PAID
halfshaft 30% PAID
isuzurover 30% PAID
revor 49% - Micka is sorting out payment for this
IceFyre (AULRO)
So if Keith is getting 2 sets we only need one more?GRIMACE wrote:Got another participant from AULRO.
IceFyre, is going to notify me once deposit is done.
Current list;
buzz66 30% PAID in full cause we were all to slow
Micka 49% PAID
Grimace 49% PAID
jbell 49% PAID
halfshaft 30% PAID
isuzurover 30% PAID
revor 49% - Micka is sorting out payment for this
IceFyre (AULRO)
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Dude...really. There is no need for one rolling eyes, let alone two.jbell wrote:might have to do the same as Buzz66 if this drags on to long
Everything is organised. Yes it has taken longer than we all would have hoped, but $1265 is a lot of money to a lot of people.
At this stage we are a couple off the 10 needed. If we can't get the 10, then I have to go back to Warren and see what price changes (hopefully none) happen. To get some idea, 10 sets @ $1265 yields a $12650 sale for them. If we go in at 7 sets then that sale is reduced to $8855.
That is a 30% drop!
Obviously that is far less appealing for them, and not good news for us cause it will bump up the price.
I am going to see them, probably tomorrow morning to see what can be arranged.
Who is online
Users browsing this forum: No registered users and 30 guests