I have bought a 5.0l injected v8 and need to get confirmation of what year the vehicle it came out of was for engineering.
can anyone point me in the right direction?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
getting original vehicle details from engine number
Moderators: toaddog, TWISTY, V8Patrol, Moderators
getting original vehicle details from engine number
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
not sure if it matters that much.
when we did the 7 we had to prove its from car built between x.....x its for emmissions and the emmissions are the same for a few years of the motors life generally. the car had to meet emmission code x at the time.
when we did the 7 we had to prove its from car built between x.....x its for emmissions and the emmissions are the same for a few years of the motors life generally. the car had to meet emmission code x at the time.
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
"The only thing to watch out with the engine would be a requirement that the engine should comply to the same or later emission standard. This means that the replacement engine must come from the same year or a later model vehicle"
The engine(i have been told) is a VP motor(ran to 93) and the hilux may be a 93 model( not yet purchased) but the engine number prefix states that it is a standard (no mods HSV etc) motor from a VN -VS
as all 5.0l engines in standard trim are essentialy the same as long as i use the later emissions standards and equipment (evap,cats, charcoal canisters etc)
i should be pretty good right?
The engine(i have been told) is a VP motor(ran to 93) and the hilux may be a 93 model( not yet purchased) but the engine number prefix states that it is a standard (no mods HSV etc) motor from a VN -VS
as all 5.0l engines in standard trim are essentialy the same as long as i use the later emissions standards and equipment (evap,cats, charcoal canisters etc)
i should be pretty good right?
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Who is online
Users browsing this forum: No registered users and 1 guest