Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Who knows what this is?

Tech Talk for Jeep owners.

Moderator: GUtripper

Forum rules
Post Reply
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Who knows what this is?

Post by SIMMO84 »

I have an oppertunity to get this cheap. The only reason i would be interested is for the diffs to swap into a hilux. As far as i know jeeps have dana diffs? What model/series would they be and are they any good?Would the diffs be stronger than hilux and are they easy enough to get parts, lockers (Mechanical not air) thanks for any help in advance
Image
The hilux is plaanned for a V6 commodore motor and auto box and comp use so will be driven hard. :D
Top
Posts: 22
Joined: Fri Feb 25, 2005 7:32 pm
Location: Brisvegas

Post by TOYROX »

Thats a J10 ute.
Dana 60 rear and Dana 44 front.
No worries about parts or lockers all available. Google OX locker.
Plenty of ratios.
Dana 60 are 9.75 inch and stronger then a 9inch ford. Can get 35spline axels 1.5 inch.
dana 44 are 8.75 inch and very strong as well. The open knuckles are much stronger then the toyota or nissan closed knuckle and easier to service. moly axels and CTM uni's also availableif you need them.
The lux won't break them.
The years have been good to me.
But the week ends have done all the damage.
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

Wouldnt know what the width is wheel mating surface to wheel mating surface?
Top
Posts: 22
Joined: Fri Feb 25, 2005 7:32 pm
Location: Brisvegas

Post by TOYROX »

1520mm on the rear diff. 1570mm at the front. Not hard to cut them down.
The jeep would make a much better rig then the Lux.
They are built on a cherokee chassis and a V8 will drop in. The 4 speed will have a granny low gear.
35's will fit and don't look out of place.
The years have been good to me.
But the week ends have done all the damage.
Top
Posts: 3
Joined: Thu Apr 30, 2009 4:45 pm
Location: brighton

Post by jkrenegade »

If you dont want it pm me the details, I have been looking for a j10 for a while.
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

The body is stuffed (rust) maybe if you were keen enough you could cut it all out but theres heaps in every panel, apparently it has a nissan 6cyl turbo diesel in it (not td 42 dunno wat it is tho) and has g/box dramas.
If anyone is interested let me know and i will pass on his details.
Top
Posts: 22
Joined: Fri Feb 25, 2005 7:32 pm
Location: Brisvegas

Post by TOYROX »

SD33T if it has a turbo. Did not come from factory with turbo only SD33.
PM me details if you can.
The years have been good to me.
But the week ends have done all the damage.
Top
Posts: 469
Joined: Wed Sep 24, 2003 12:40 pm
Location: Redcliffe/Brisbane

Post by Timmy »

i'll put my hand up for this too if no onw wants it ;)
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Jeep owners details

Post by SIMMO84 »

Andrew 0415 721 810
Top
Posts: 22
Joined: Fri Feb 25, 2005 7:32 pm
Location: Brisvegas

Post by TOYROX »

It in mackay or it would be in my yard by now.
The years have been good to me.
But the week ends have done all the damage.
Top
Posts: 67
Joined: Sat Jul 18, 2009 5:37 pm
Location: Bringin some Rocky flavour to the Coffs Coast

Post by 76patrol »

is this rusty body still layin around?
that f***n hippy in that f*"*""n g60

76 troll rockin a rb30 gq driveline, rollin on 37's and flexin with a 4 link.

buildup at downunder4x4.net
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

You missed it by about 2 weeks. Is the size of a coffee table about now.
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

SIMMO84 wrote:You missed it by about 2 weeks. Is the size of a coffee table about now.
CRushed it?? What a danged waste :roll:
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

yep it was up for grabs for ages, noone here wanted it so it went to the scrappys. Was offered to me free, but didnt want to go to the hassle for what I wanted it for.
Top
Post Reply

Return to “Jeep”

Who is online

Users browsing this forum: No registered users and 0 guests