Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

simple power steer?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
User avatar
St Jimmy
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".

Post by St Jimmy »

I'm just about to do the vit power steer
but after this :?: but i'm only running
235/75/15 tyres .Will the vit p/s do the job
and how will the plate pass the engineer
as i will be going to athol mullins [sp]
regards
b59
slugs are just snails that sold their belongings for drug money

Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Top
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Post by NIK »

The jimny box must be internaly different as well as bolt holes to the vit as Ihave it and with 33s at 5psi on rocks it turns not a prob but most of the time at 10 psi without any dramas havnt even fitted a cooler yet.
Nik
Top
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

joeblow wrote:looking at the adaptor....do they make m12 countersunk grage 8 bolts?
Joe,

I can't remember the size of my bolts. They were the same as the stockers so I guess M12 and were definately graed 8 or up. I didn't have a drama getting them from a structural and industrial fasteners joint. They had them on the shelf. The countersinking was the painful bit hehe. The 3 flute bit on my drill press was useless.
Sierra
2 inch RUF
G16A
Megasquirt Injection
30 inch BFGs
Vit P/S
4.9 T/C gears
Hilux Project = Dead
Top
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

joeblow wrote:looking at the adaptor....do they make m12 countersunk grage 8 bolts?
Joe,

I can't remember the size of my bolts. They were the same as the stockers so I guess M12 and were definately graed 8 or up. I didn't have a drama getting them from a structural and industrial fasteners joint. They had them on the shelf. The countersinking was the painful bit hehe. The 3 flute bit on my drill press was useless.
Sierra
2 inch RUF
G16A
Megasquirt Injection
30 inch BFGs
Vit P/S
4.9 T/C gears
Hilux Project = Dead
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

can imagine with the countersunk stuff...hard enough getting oddball metric stuff from anywhere.
Top
Posts: 41
Joined: Tue Jun 02, 2009 1:54 pm
Location: Adelaide

Post by paulv »

What is the pros and cons of a Cressida box vs a Jimmy box?

Crissida is a stronger box?
Cheaper to buy?
Requires some drilling and sleeving of the chassis rail to fit.
Use the Crissida Pitman arm?

Jimny is expensive to buy?
Bolts straight up?
Use the Jimny Pitman arm?


Is that correct?
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

mud4b wrote:what exactly is the mx 32/62 box off as in what toyota. im trying to find jimny power steering for my jimny but prices are totally crap.

cheers mark
MX32 and MX62 are the model codes for the cressida that the pumps are off.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 41
Joined: Tue Jun 02, 2009 1:54 pm
Location: Adelaide

Post by paulv »

paulv wrote:What is the pros and cons of a Cressida box vs a Jimmy box?

Crissida is a stronger box?
Cheaper to buy?
Requires some drilling and sleeving of the chassis rail to fit.
Use the Crissida Pitman arm?

Jimny is expensive to buy?
Bolts straight up?
Use the Jimny Pitman arm?


Is that correct?
The reason people go to the trouble of moding the chassis rail to fit the Crissida box is clearer now.
The wreckers I phoned want $400 + for just the power steering box from a Jimny.
Ouch.
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

not only that but there are no intermediate shaft mods and a vit radiator fits comfortably too.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Posts: 41
Joined: Tue Jun 02, 2009 1:54 pm
Location: Adelaide

Post by paulv »

How "factory" does the Cressida box and Cressida pitman arm look when it is in place with the drilled and sleeved chassis rail?

I am just wondering if it would be the kind of mod that would be frowned upon by our road transport department, or if, with a lick of paint it would pass by as "meant to be there".
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 4 guests