Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

410 to 413 body bolt differences

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 264
Joined: Tue Aug 31, 2004 4:57 pm
Location: New Zealand

Contact:
Contact Rotazuk

410 to 413 body bolt differences

Post by Rotazuk »

Yes I searched but must have my tongue the wrong way as nothing came up (lots of usless , for the moment , info on swapping engines etc ) and I just looked in the bible but is seems half of its missing as only the engine info list was there ???????

Anyway what is the difference in the nt and wt body mounts , from memory its the two bolts behind the front seats . Is this right ? Really want to know how easy it is to put a nt body on a wt chassis and I think you need to redrill these holes in the chassis ?

Thanks

Chris
Top
Posts: 120
Joined: Thu Feb 07, 2008 7:53 am
Location: Chur Bay, New Zealand

Contact:
Contact Mudbits

Post by Mudbits »

From memory there is no difference just the 1000cc has a flat rubber mount area on the chassis where as the 1300 has recessed rubber mounts.
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Been a while, but i swapped a NT hardtop onto a WT chassis (both 1.3) and i didnt have any trouble with mounts from memory.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 16
Joined: Sat Dec 02, 2006 10:46 am
Location: Tauranga NZ

Re: 410 to 413 body bolt differences

Post by Bluezuki »

Rotazuk wrote:
Anyway what is the difference in the nt and wt body mounts , from memory its the two bolts behind the front seats . Is this right ? Really want to know how easy it is to put a nt body on a wt chassis and I think you need to redrill these holes in the chassis ?
Thats the difference :)
If it's worth doing, Do it right the first time!!
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Most 1lt's the centre bolts under the seat are removable whereas the 1.3's they are fixed studs.
;)
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Just cruzin is correct.

Also, 1.3 captive studs are longer than 1.0 and have a longer threaded section- this is due to the larger rubber body mount bushes on the 1.3.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests