Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Size of rims & tyres

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 212
Joined: Sun Nov 02, 2008 10:53 pm
Location: Sydney

Size of rims & tyres

Post by chugga »

What are the widest tyres and rims I can put on my 1990 Feroza without damaging wheel bearings ect? I would like to put on 10" if possible.
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Its about offset not width.... if the rim is centered over the bearings then the load is unchanged.

And there's more to it than just that - you have to consider scrub radius as well with negative offsets
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 101
Joined: Tue May 20, 2008 11:12 am
Location: Penrith

Post by phraze84 »

i got 15x8's i think with 33's on my 92 wide track.

i had to remove all the plastic gaurds and cut bits of metal off to stop the scrubbing.

it handled like shit till i removed the sway bars
I got a sweater for Christmas... I wanted a screamer or a moaner!
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Width and what he asked are two different questions.

Without quoting offset its not much help.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 212
Joined: Sun Nov 02, 2008 10:53 pm
Location: Sydney

Post by chugga »

Yes mighty your right. I want wide wheels with a good offset about 10"
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

If you start adding substantial negaive offset ( rim sticks out more than in ) you will add load to the bearing assembly and just as importantly increase the scrub radius when truning the wheel which will make the chances of the rear of the tyre touching the inner guard when turning much greater.

Width in its own right really isn't a killer if offset is small - the major issue will be gaurd clearance at the top on bump and flare clearance at the rear.

In practice the guard rear is the major problem becuse it cant be fixed by bodylift etc. The Feroza flares really aren't long enough for 30+inch tyres if your going off road.

I'm in the process of making longer flares to top the 34's destroying my guards/flares.

Also....... why such a wide rim - you need to be very carefull to clear the top ball join on the inside and a tyre designed to fir n a 10 " rim will require massive offset to clear.

Might be ok for sand driving but might not be an ideal tyre for most other uses.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 212
Joined: Sun Nov 02, 2008 10:53 pm
Location: Sydney

Post by chugga »

Thanks for that info. I am going to keep my 30 x 8" because we do alot of dirt tracks when we go hunting. :lol:
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

I think thats' an excellent choice... big enough to make a difference, without hurting the gearing too much, damaging the guards etc etc.

Sometimes it doesn't seem cool to stay with a smaller option - but it is a very workable compromise.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests