Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

how much will it cost

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 111
Joined: Tue Apr 28, 2009 9:24 pm
Location: rockhampton

how much will it cost

Post by stock.as.arock »

hey guys im thinkin about puttin coil in the front of my 1hz 75 and i was just wonderin rounds abouts how much it would cost
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

depends on who is doing the work, are you doing it or will you be paying someone to do it?

alot of variables will effect the costs, even down to what you pay for diff housings etc or if your cutting off mounts and reusing yours etc.

im no expert in it but if you give a bit more detail of your plans the experts will be able to offer better advice.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 111
Joined: Tue Apr 28, 2009 9:24 pm
Location: rockhampton

Post by stock.as.arock »

i will be doin the work and i was goin to see if a 79 series diff housing would fit cause i im sure that the 75 hubs and diff bolt straight on and i was just goin to use 79 series coils and drop Radius Arms the hole lot realy it will be just a 79 series front end and then later on i will do the rear
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests