Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear wheel studs 80 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

rear wheel studs 80 series

Post by flyinwall »

how hard is it to change the rear wheel studs i have replaced the front ones (i snapped off 4 in brissy last weekend and i was stuck on the side of the road for about 6 hours waiting for help to arrive with some spare parts that wouldnt fit so i used some suzuki sierra wheel studs to get me home) and now i want to replace the rear ones for peace of mind so how hard is it to do and how do i do it

cheers
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Top
Posts: 173
Joined: Sun Jul 15, 2007 4:56 pm
Location: qld

Post by cun7s »

the same as the front mate. pull the drum of take the axel out and then take the hub off mate. and dont put the zook studs in it like we did on the side of the road.
Top
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

Post by flyinwall »

na we got some brand spanker new ones for it
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

Im pretty sure you can do it with out removing the hub
Top
Posts: 70
Joined: Wed May 20, 2009 5:47 pm
Location: WARNEET

Post by tiny80 »

you can up grade to 100 series studs 10mm not 8mm
just tap out 8mm studs to 10 mm,
install 10mm studs with 8mm cones opened up,
drill out flange plate on front and rear to suit 10mm.
that is the best easy way i have found
you can do it on the car if you
are good with taps and drill
you can put a spacer on, around the flange plate and studs
you can buy a 1/2 socket stud remover /installer kit stanley
its the best thing i ever brought for that shit job
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests