Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What temp range for thermos on a SD33T

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

What temp range for thermos on a SD33T

Post by pongo »

I am in the process of starting a new project and am asking for help regarding engine operating temps for the old SD33T.

The plan is to reuse the thermos i have out of an AU falcon but this time running them automatically with a temp switch and have a manual overide.

So, what im looking for is opinions on what the temp range the thermos should be on-off at. Mainly for touring and highway towing boat and it also needs to run a couple of heat exchangers to heat up the fuel ( WVO) . i plan to install a larger radiator as well shortly
Last edited by pongo on Mon Jul 27, 2009 6:10 pm, edited 2 times in total.
Top
User avatar
DEZ
Posts: 205
Joined: Sun Apr 01, 2007 8:45 pm
Location: sydney

Post by DEZ »

im acutally after the same answer but for a td42 with a 91 degree thermostat. Working out which temp thermo switch to get.

Il be running mine on a 3 way switch thermo,off,constant
95 GQ td42
3"lift 33 claws
covered in mud
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

i bought a davis craig one and it has a range of 65 deg to 105 deg so i just turned it off and went for a strap on the highway and found that the car sits on 90 deg so i bumped it up so at 92 deg the fan comes on.
this was done on a hot day in summer
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

i dont want to run a davis type. I want to run a proper sender mounted in the thermostat housing.

Thanks for the info though
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest