Is there an adaptor available for a squarebore 4 barrel holley to the two barrel TB42 manifold?
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4 barrel holley on TB42?
There are universal ones you drill (they have the holley pattern), I'd suggest a 2bbl 500 cfm would be sufficient though.
They are time consuming to tune but the factory carby can be jetted to suit engine mods, we have used a 350 Holley in a blow through turbo application, Can't use vacuum secondaries on a blow through.
Joel
They are time consuming to tune but the factory carby can be jetted to suit engine mods, we have used a 350 Holley in a blow through turbo application, Can't use vacuum secondaries on a blow through.
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Who is online
Users browsing this forum: No registered users and 2 guests