Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
93 sxII cv's
Moderator: Tiny
93 sxII cv's
Help please i need to find cheap CV's to replace on my 93 feroza all help appreciated! brenton
Define cheap........ are you talking Genuine, Aftermarket, second hand... ?
each has a different definition of cheap.
And BTW, CV failures aren't common on Feroza's as they just sit there and do nothing most of the time. How did you stuff yours ?
each has a different definition of cheap.
And BTW, CV failures aren't common on Feroza's as they just sit there and do nothing most of the time. How did you stuff yours ?
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
BTW the actual CV's for narrow and widetrack are identical ( interchangable ) its only the axle lengths which differ and of course the axles aren't part of the joints.
235's shouldn't overload the CV's as a stock Feroza simply doesn't have the torque or traction to break them - usually, still stuff happens.
You have done the obvious visual checks I'm assuming, it would take all of five minutes to confirm its the axles/cv's as opposed to the hub /diff.
235's shouldn't overload the CV's as a stock Feroza simply doesn't have the torque or traction to break them - usually, still stuff happens.
You have done the obvious visual checks I'm assuming, it would take all of five minutes to confirm its the axles/cv's as opposed to the hub /diff.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
I haven't checked properly, but the amount mechanical of knowledge around when i noticed it proves CV also had to use 4X4 afterward and it works, just clicks very loudly! are you sure they are interchangeable, because they will come from interstate! you do seem the knowledgeable one on here though, i will trust you!
Who is online
Users browsing this forum: No registered users and 15 guests