Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
intercooler question fan sizes please
intercooler question fan sizes please
can someone tell me what size fan to run on the intercooler on a 2008 gu patrol ive had a look around the forum and found nothing to help me ive even loooked on other forums without much luck
cheers
Brendon
cheers
Brendon
Cheers
Brendon
2008 nissan patrol
Factory bullbar with 12000lbs ironman winch, PLESSEY_MTR96_UHF 100ch 25watts
needs diff lock F/R
Brendon
2008 nissan patrol
Factory bullbar with 12000lbs ironman winch, PLESSEY_MTR96_UHF 100ch 25watts
needs diff lock F/R
Re: intercooler question fan sizes please
big as you can fit in the scoop.
Re: intercooler question fan sizes please
so are you saying to put one on top of the intercooler because i was going to put it under it so it was sucking the air threw itbogged wrote:big as you can fit in the scoop.
Cheers
Brendon
2008 nissan patrol
Factory bullbar with 12000lbs ironman winch, PLESSEY_MTR96_UHF 100ch 25watts
needs diff lock F/R
Brendon
2008 nissan patrol
Factory bullbar with 12000lbs ironman winch, PLESSEY_MTR96_UHF 100ch 25watts
needs diff lock F/R
I bought a craig davies fan for the intercooler on my Terrano II. I think it was a 10 inch fan or somethng like that. It may be an 8 inch job as it is slightly smaller than the intercooler. I then made a shroud out of checker plate aluminium to cover in the corners of the square intercooler not covered by the fan. Then bolted it all to the intercooler shroud.
The polarity on the craig davies fans can be reversed so they can suck or push depending on what you want.
I had it installed then removed it after having wiring problems, but plan to re-fit it ASAP. I can post some pics when done.
The polarity on the craig davies fans can be reversed so they can suck or push depending on what you want.
I had it installed then removed it after having wiring problems, but plan to re-fit it ASAP. I can post some pics when done.
99 Nissan Terrano II TDi, 2" lift, 30's, UHF, Hellas, Bull Bar
that would be great if you could . did you have it on top or bottom of the intercoolertritontray wrote:I bought a craig davies fan for the intercooler on my Terrano II. I think it was a 10 inch fan or somethng like that. It may be an 8 inch job as it is slightly smaller than the intercooler. I then made a shroud out of checker plate aluminium to cover in the corners of the square intercooler not covered by the fan. Then bolted it all to the intercooler shroud.
The polarity on the craig davies fans can be reversed so they can suck or push depending on what you want.
I had it installed then removed it after having wiring problems, but plan to re-fit it ASAP. I can post some pics when done.
Cheers
Brendon
2008 nissan patrol
Factory bullbar with 12000lbs ironman winch, PLESSEY_MTR96_UHF 100ch 25watts
needs diff lock F/R
Brendon
2008 nissan patrol
Factory bullbar with 12000lbs ironman winch, PLESSEY_MTR96_UHF 100ch 25watts
needs diff lock F/R
This may help you. Its what gave me the idea in the first place. This guy has fitted it to his ZD30 Patrol. He seems to know his stuff.
http://www.chaz.yellowfoot.org/Intercooler%20Fan.htm
http://www.chaz.yellowfoot.org/Intercooler%20Fan.htm
99 Nissan Terrano II TDi, 2" lift, 30's, UHF, Hellas, Bull Bar
Thanks mate great stufftritontray wrote:This may help you. Its what gave me the idea in the first place. This guy has fitted it to his ZD30 Patrol. He seems to know his stuff.
http://www.chaz.yellowfoot.org/Intercooler%20Fan.htm
Cheers
Brendon
2008 nissan patrol
Factory bullbar with 12000lbs ironman winch, PLESSEY_MTR96_UHF 100ch 25watts
needs diff lock F/R
Brendon
2008 nissan patrol
Factory bullbar with 12000lbs ironman winch, PLESSEY_MTR96_UHF 100ch 25watts
needs diff lock F/R
Measure the size of your intercooler, go to your nearest auto parts store retailing the craig fans (google their site and find out there stockists), then get the fan diameter that best fits. I'm not eistein and even I was able to work it out.
99 Nissan Terrano II TDi, 2" lift, 30's, UHF, Hellas, Bull Bar
Who is online
Users browsing this forum: No registered users and 4 guests