Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NK V6 Questions

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

NK V6 Questions

Post by ISUZUROVER »

Hi guys,

A guy at work has a '97 lwb 3.5 DOHC xls. I assume that means it is an NK?

The wheel bearings on one front corner need replacing. Does anyone have the PNs? And also somewhere to get them from in Perth that won't charge the earth?

Also, the engine uses a small amount of oil. Maybe a litre every month. Is this normal for these engines??? No leaks and no smoke - maybe a VERY small puff when pulling away after idling at the lights.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

'97 DOHC could be NJ or NK. I'd be surprised if it makes a difference for front wheel bearings, but you should get them to compare part numbers for both.

NFI about P/Ns or where to buy. I'd get prices from Mitsubishi, Repco, and CBC.

Oil consumption isn't unusual for Mitsu engines - probably valve stem seals.
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Thanks Scott,

He checked the compliance plate and it is an NK.

How easy is it to do the valve stem seals???
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Post by bakerboy »

if i get round to it on the weekend ill see how much i can get those wheel bearings for ya mate
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Top
Posts: 2
Joined: Tue Aug 04, 2009 6:36 pm
Location: Melbourne

Post by Sharky71 »

97 I would be thinking is NK OR NL
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

bakerboy wrote:if i get round to it on the weekend ill see how much i can get those wheel bearings for ya mate
Cheers.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 7
Joined: Tue Sep 02, 2008 9:17 am
Location: Hoppers Crossing, VIC, AUS

Post by jimako »

Ive managed to change the valve stem seals on a 6g72 without removing the heads, i believe on the 6g74 heads need to be removed.
Top
Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Post by bakerboy »

mate i can get them for about 30 bucks, ill ring GBC on monday and make sure if its only one side or a pair
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 21 guests