Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
bought gq patrol 6.2chev diesel anything i should look for??
bought gq patrol 6.2chev diesel anything i should look for??
hey guys just bought a 95 coilcab gq patrol ute with a 6.2 chev diesel in it. UNSEEN! price was right so im not fuss'd either way. spoke to the seller he says everything is in really good condition car motor etc. says motor glows up n starts no worries. will be heading down south to pick this ute up next week so im just quizing u guys and pickin your brains to see if you's can help me out with anything i should look for? more so particular stuff with the conversion are these motors known to have certain leaks noises etc? any help or info is greatly apreciated!!
why?? for the simple reason it was bought off a dealer and if i can find anything wrong with it or perhaps something that doesnt look right i can ask the seller/dealer about it and perhaps sumthing can be rectified about whatever the concern is. purely for example reasons lets say if these motors were prone to having a loose head and signs were oil leacking from a back corner of the head i could have the seller/dealer possibly tighten it up in his work shop.
im sure you see my reasoning behind my question
im sure you see my reasoning behind my question
dunno, as far as i knew, these motors were pretty good, and very robust.....
Only think i would be doing is
1) Checking all the oils in motor, box's and rear diff to make sure they are all topped up, and then
2) Getting it home and changing all the oils and filters
just piece of mind really
Hopefully someone with some more in-site will offer some more advise
and postie piccie in show us your patrol thread
Only think i would be doing is
1) Checking all the oils in motor, box's and rear diff to make sure they are all topped up, and then
2) Getting it home and changing all the oils and filters
just piece of mind really
Hopefully someone with some more in-site will offer some more advise
and postie piccie in show us your patrol thread
Nice gq swb ute chop with a huffer for the good times
thanx for ur reply mate the oil levels in everything will be checkd naturally cant trust anyones word to weather theyve been done or not. ive had nothing to do with any other sort of motor in a patrol other then a 4.2 diesel or zd30 so the quesion was asked just to see if there should be anything to be aware of. in my opinion i got it really cheap. so if theres anything prone to these engines it would be good to kno before i drive it out of the car yard.
There's a place in Perth called Brunswick diesels who do conversions with chev diesels (but you shouldn't have to hear that from someone in NZ) so it's obviously a promising thing.
Make sure you put a pic up and let us know how it goes when you pick it up
Make sure you put a pic up and let us know how it goes when you pick it up
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
everyone seems to like these chevy diesesls, but i thinh they're crap.
Brunswick diesels are some of the dodgiest operators around.
I've got 2 mates who both spent over $20,000 on 6.5's and both cry themselves to sleep at night. Yes, they have head issues, including the 6.5, 2nd pair of heads for Dave and 3rd set for Robby ( the last pair stung him for $5,000)
When Brunswick are approached they try to squirm out of it all.
Rob also had to replace a leaking water pump, fair enough, but it turned out all the wrong thread bolts had been used right through the front of the motor including timing cover and all ancillary's, and everyone of them snapped when tryed to remove. I don't know what they're doing there when they assemble their motors.
I forget all the problems they've had, but it seems like every couple of months either of them is making the 4oo km return trip down there to get something sorted out, usually at there expense.
I also remember chatting to an old bloke who was stranded in Exmouth a few years back, he was absoulutly fuming, and cursing Brunswick for saying they fixed "whatever" and clearly did'nt.
And on top of all that, my mildly worked TD42T leaves them both for dead, even when towing Robby's 24ft sharkcat.
Think about the fact that a 6.5 chev has a 1/3 larger capacity than a TD42 yet weighs a bit less. it suggests to me how lightly the block and heads are cast.
I think the 6.2 had fewer studs securing the heads and were more prone to head problems.
Stick to japanese and leave the yank crap well alone.
Brunswick diesels are some of the dodgiest operators around.
I've got 2 mates who both spent over $20,000 on 6.5's and both cry themselves to sleep at night. Yes, they have head issues, including the 6.5, 2nd pair of heads for Dave and 3rd set for Robby ( the last pair stung him for $5,000)
When Brunswick are approached they try to squirm out of it all.
Rob also had to replace a leaking water pump, fair enough, but it turned out all the wrong thread bolts had been used right through the front of the motor including timing cover and all ancillary's, and everyone of them snapped when tryed to remove. I don't know what they're doing there when they assemble their motors.
I forget all the problems they've had, but it seems like every couple of months either of them is making the 4oo km return trip down there to get something sorted out, usually at there expense.
I also remember chatting to an old bloke who was stranded in Exmouth a few years back, he was absoulutly fuming, and cursing Brunswick for saying they fixed "whatever" and clearly did'nt.
And on top of all that, my mildly worked TD42T leaves them both for dead, even when towing Robby's 24ft sharkcat.
Think about the fact that a 6.5 chev has a 1/3 larger capacity than a TD42 yet weighs a bit less. it suggests to me how lightly the block and heads are cast.
I think the 6.2 had fewer studs securing the heads and were more prone to head problems.
Stick to japanese and leave the yank crap well alone.
Yeah mate im saying that my 4.2 tows it easier than his 6.5bogged wrote:so your sayin yours towing a 24ft sharkcat leaves another patrol with a 6.5 in it for dead? or his is towing the sharkcat?steel wrote:And on top of all that, my mildly worked TD42T leaves them both for dead, even when towing Robby's 24ft sharkcat..
i was down to 3rd gear and working hard in his 75 series towing the cat home from Lancelin once, yet on a trip to S-bend with my patrol, i managed to hold 4th gear ( though still working hard ) and the hills were a bit bigger.
My other mate has his in a 47 series with 75 series gearbox and if we are both unloaded going up greenmount hill, i can pull away from him.
just to clarify, mine has turbo and theirs don't
My mate is now selling his 47 series cruiser ute with the awesome 6.5 chev V8 diesel,, come and grab a bargain.young pup wrote:ye absolute shit engine, take it out sell it to me cheap hehe
id be cheering if i was you, just check all the oils and filters really...
enjoy it lucky find
I think he wants about $20K for it,, it's a nice truck apart from the engine.
im only a p plater n ive already got 2 fourby's, parents will shoot me if i rock up home with another one hey.. pretty broke any way 80% of my apprenticeship wages goes towards the cars the rest goes to board and food... gotta love itsteel wrote:My mate is now selling his 47 series cruiser ute with the awesome 6.5 chev V8 diesel,, come and grab a bargain.young pup wrote:ye absolute shit engine, take it out sell it to me cheap hehe
id be cheering if i was you, just check all the oils and filters really...
enjoy it lucky find
I think he wants about $20K for it,, it's a nice truck apart from the engine.
young and doesnt know any better, thats my excuse any way.
1. Upload on to photobucket video and image hosting (have found this the easiest)
2. In photobucket click on the "direct link" and it'll show "copied" (Temporarily)
3. Now it's easier to have 2 tabs set up, 1 for outers and 1 for photobucket
4. On outers make sure you have their "img" in front and behind each shot if you do this they'll come up as mine do. Just press enter between each 2 shots you put up otherwise they'll keep going across the page!
Hope this is clear as mud Good luck
2. In photobucket click on the "direct link" and it'll show "copied" (Temporarily)
3. Now it's easier to have 2 tabs set up, 1 for outers and 1 for photobucket
4. On outers make sure you have their "img" in front and behind each shot if you do this they'll come up as mine do. Just press enter between each 2 shots you put up otherwise they'll keep going across the page!
Hope this is clear as mud Good luck
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
$20+k is for the 6.5 conversion with fully reconditioned engine. not the 6.2burleygu wrote:id throw some pictures up however can anyone give me some insight on how to do so.
20k u say i guess thats wat the conversion costs alone. if i told yas what i paid for this yous would all be hunting me down with pitch forks so before i boust about it ill see if it gets me home first lol
i'll save you guys the trouble in regards to posting up pics
http://cgi.ebay.com.au/1995-Nissan-Patr ... 286.c0.m14
Cheers,
Jes
http://cgi.ebay.com.au/1995-Nissan-Patr ... 286.c0.m14
Cheers,
Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
DUCATI <-----Worlds best warning label
thats the one jes. which is now residing in my front yard drove it all the way home didnt miss a beat only thing i could fault was a dicky radiator hose and a dirty radiator didnt have any tools so i just kept topping it up and drove it on home, am very happy with it.
big thank you to everyone who helpd me out with some helpful feedback in regards to my original question.
big thank you to everyone who helpd me out with some helpful feedback in regards to my original question.
Who is online
Users browsing this forum: No registered users and 121 guests