Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

engine swap

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 12
Joined: Sun May 17, 2009 8:54 pm
Location: Western Australia

engine swap

Post by dferozaII »

my widetrack ferozas 1.6l engine is at 224000 k's.
am wondering how long roughly they last? if anybody knows.
and whats the best option with replacing the engine, as far as fitting wise and changin all the other bits to suit it.
as im keen for more power haha
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

You've not done to badly imo...... about 200,000 seems to be fairly normal but it depends a lot on how hard they get driven - much like any other engine.

As for your other question, what actually are you asking........ engine swap, replacement, second hand etc etc - it very unclear.

Give us an idea as to what your actually are thinking about and people may well be able to share there experiences.

Also, this topic has been discussed extensively ( probably by every Feroza owner ) so you could get some usefull feedback from the search function about what's been done or looked at before.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 212
Joined: Sun Nov 02, 2008 10:53 pm
Location: Sydney

Post by chugga »

I reconditioned mine and did some extras and now she goes great. The power thing isnt going to happen as a 1600 in a 4wd is not really suited.
Posts: 12
Joined: Sun May 17, 2009 8:54 pm
Location: Western Australia

Post by dferozaII »

i want to replace it completely. as im not sure whether to replace it with the applause engine, which is the 1.6l again. but i wish to able to get more power. and replace this engine with a bigger one with minimal changes to be done with other stuff. and whether its expensive to do or not...
Posts: 53
Joined: Tue Aug 14, 2007 8:59 pm
Location: Hobart, Tasmania

Post by 7017 »

MM, would a commodore v6 fit with an auto box and hilux transfer?
Posts: 212
Joined: Sun Nov 02, 2008 10:53 pm
Location: Sydney

Post by chugga »

dferozaII wrote:i want to replace it completely. as im not sure whether to replace it with the applause engine, which is the 1.6l again. but i wish to able to get more power. and replace this engine with a bigger one with minimal changes to be done with other stuff. and whether its expensive to do or not...
We all wish to have extra power mate. One thing you will not get too many speeding fines :lol:
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

A Commodore V6 "could" be made to fit but it would be a very significant job and I'd doubt if it could be engineered currently.

Besty had one fitted in his along with live axles ( basically Hilux running gear with the Holden engine ) but it was a significant job, engineered when things were a bit easier, and ended up being far too tall for my liking.

And just in case there's some confusion about the Applause engine vs Feroza keep in mind they are the same except for the cam ( and a few minor accessories ) so don't expect much.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 12
Joined: Sun May 17, 2009 8:54 pm
Location: Western Australia

Post by dferozaII »

yeah ive heard about the commodore v6 by word of mouth. and have a mate whos done it to his feroza. so im going to ask him about the job, and hopefully get a solid idea with much work will have to be done into fitting a v6 into it. and then find out a rough idea of how mcuh itll cost all up.
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Don't overlook the requirement for engineering ( the legal bit ). Would be a shame to do all that work, get pinged and not be able to ever get back it back on the road.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

Look at a torquey, modern 4 cylinder.

2.7 hilux - 3RZ
SR20 (atmo)
Hell, some people even put turbo mazda rally motors in them ;)

The real key is gearbox choice IMHO. You're not going to do any great shakes with the feroza gearbox or transfer case.

I'd be looking at getting the right gearbox in it ( like an AW-4 series auto) and transfer case you can get gears for (like a hilux or vitara case)

Then deal with the motor.

Also bear in mind, you only can only use as much power/torque as you have traction. Much more power than you have grip for just makes for a dangerous drive in a SWB car with a high centre of gravity.

Just some thoughts.

I would have thought that 100kw/200Nm would actually be plenty if it wasn't peaky.

I'm not a fan of the V6 commodore motor.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Gwagensteve wrote:Hell, some people even put turbo mazda rally motors in them ;)
Who would be stupid enough to do that :oops:

P.S. the BIG turbo was a bit peaky on average for my use - the smaller option was more driveable. Pushed hard it flows around 200kW but dyno time shows its got more than enough torque at the required 2700 RPM when not on boost.

Still ATM its sitting on the floor so its a complex paperweight.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

:D

I have a paperweight or two of my own.... I understand your pain.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 40
Joined: Sun Feb 24, 2008 3:23 pm
Location: brisbane

Post by rentonpeter »

last time i checked i thought feroza's (especially wide tracks) have a low center of gravity as they have a fibreglass roof, are 15mm wider track than a hilux and are spua. the problem with fitting a different motor is the height available in the engine bay. Unless you do a body lift many engines will simply not fit under. However if you do a body lift you can fit a hilux box and engine (3rz-fe)... just. however if you are poor you can look at fitting a hilux box (like i am). just need to get a bell housing made. Mine is at the engineers however i have run out of money.....
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

As a guess i'd pretty much agree that a Feroza would have a lower COG than a lux...... however the wheelbase to track ratio is much closer on a Feroza making it much less stable ( and lots of power makes this a significant issue). Mines frighteningly close to square in the track to wheelbase stakes and can really create white knuckles on some surfaces at what passes for speed in a Feroza.

As per engine height..... its mostly the potential interference of the sump on the front diff, making a new sump that moves the oil pan to the very back or passengers side does wonders. The BPD "SHOULD" actually end up lower in the car than the HDEG and that's after I've pulled my front diff up, but making the sump is a real pita as its alloy and forms part of the face to the bell housing.

Still its not like i have anything else to keep me amused....... :roll:
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 101
Joined: Tue May 20, 2008 11:12 am
Location: Penrith

Post by phraze84 »

how hard is it to engineer a engine swap dropping a Applause or Charade or something like that?

If it needs to be engineered at all?
I got a sweater for Christmas... I wanted a screamer or a moaner!
Posts: 120
Joined: Tue Aug 11, 2009 11:53 pm
Location: Launceston, TAS

Post by wacky »

The Applause engine swap is more the case of an "identical replacement" (add your old bits), not a completely different engine altogether (like a V6 would be) - no engineering needed.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests