Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

air locker not releasing air

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

air locker not releasing air

Post by Duff »

When i turn on my air locker to engage it, then turn it, your supposed to hear this pssst, then the locker releases all the air. Now mine does not do this. Can you which part of the locker do i need to replace/adjust/clean. Does it hurt the locker if this does not happen. However the locker still engages and disengage as normal.
Top
Posts: 306
Joined: Fri Oct 10, 2008 4:02 pm
Location: Hobart, Tasmania

Post by tas80 »

The air should be released from the solenoid mounted on your compressor, check the outlet for blockages
100 Series Ute: Chopped, Locked and Rolled
GU Ute: Lotsa Good Stuff!
RIP UTED100, Hello GU Ute
Top
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

if the locker is disengaging without that anoying pisst noise than thats a bonus
michael
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Re: air locker not releasing air

Post by joeblow »

Duff wrote:When i turn on my air locker to engage it, then turn it, your supposed to hear this pssst, then the locker releases all the air. Now mine does not do this. Can you which part of the locker do i need to replace/adjust/clean. Does it hurt the locker if this does not happen. However the locker still engages and disengage as normal.
when you say turn it you mean turn it off yes?. the late model solenoids have a filter on top and don't really make any noise.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

mine played up a little on the weekend i found that a bit of mud had got into the solenoid, i just pulled it off cleaned it and sprayed some wd40 and all good.
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

Post by Duff »

yer i just replaced the solinoid a few months back and it never really made any noise. thought i had to get a new one. ill clean it and see. cheers guys
Top
Posts: 474
Joined: Thu Apr 24, 2008 7:31 pm
Location: Canberra

Post by A.J. »

I have the new type solinoids with the filters on my lockers.
They do however still make a noticable "pshhhttt" sound but not as loud and powerful as the "old" style used to.
If the locker still disengages I'd say the solinoid outlet might be just blocked a bit with grit/mud.
Give em a clean and you should be sweet.
2001 GU Patrol DX wagon, TD42, Air Lockers, twin spare carrier, Barrett HF, 35" Treps, high pinion rear, Staun beadlocks, 60l Engel and more!
Top
Posts: 817
Joined: Fri Jun 17, 2005 9:23 pm
Location: Sydney

Post by TheOtherLeft »

Mine was installed a couple of years ago and it didn't make the "psst" sound back then. It didn't make the "psst" last Sunday either, and it definately worked as I tried the same line without and then with the locker.
Top
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Post by bigbluemav »

Check if the locker is still locked (and has failed to unlock) or simply is unlocked, and not locking. Jack up the back of the car and turn wheels. When you have ascertained whether the locker is actuating or not THEN start looking at possible problems.

I could always hear the locker disengage with a hiss of air escaping through the solenoid (reassuring that everything is working!!). Mine "broke" once, but only because I installed some rock sliders at LCMP and clamped the rear air line AFTER I had engaged the locker! :oops: :oops: :oops: :oops:

Good luck!
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Re: air locker not releasing air

Post by thehanko »

joeblow wrote:
Duff wrote:When i turn on my air locker to engage it, then turn it, your supposed to hear this pssst, then the locker releases all the air. Now mine does not do this. Can you which part of the locker do i need to replace/adjust/clean. Does it hurt the locker if this does not happen. However the locker still engages and disengage as normal.
when you say turn it you mean turn it off yes?. the late model solenoids have a filter on top and don't really make any noise.
both mine are new and are clearly audible.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 1253
Joined: Thu Dec 12, 2002 1:34 am
Location: QLD

Post by Jeeps »

Mine was installed last year and never made the psst noise but lately it's been doing it... :?
Top
Posts: 119
Joined: Wed Jun 17, 2009 6:20 pm
Location: Melbourne

whoo

Post by Dyls GQ »

Mine Did That... The Hose Was Kinked Out The Top Of The Solenoid
Sure Could Go Some Side Boob Right Now
Top
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

if the oring is leaking they can get diff oil in the air line. if there is enough oil in the line the locker wont dis engage.

try loosening the fitting where the air line connects to the diff and see if it will release the air.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 16 guests