Does anyone know who supplies bump stop spacers for the rear of a GV? I've noticed I get a lot of tyre rubbage on the outside shoulder when fully compressed. I think it must be rubbing on the plastic guard as the tyre hasn't been cut up by it. I have a OME lift and 225/75R16 tyres.
Cheers,
Ben
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bump stop spacers for GV
have you tried the search function? 
found this one... it was easy to find since i started the tread
http://www.outerlimits4x4.com/ftopic992 ... t=bumpstop
found this one... it was easy to find since i started the tread
http://www.outerlimits4x4.com/ftopic992 ... t=bumpstop
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
It's a little bit harder for a GV Alien - they are inside the rear coils.alien wrote:Custom ones are easy enough to make up... mine are polyurethane
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
I think there's a captive nut on the chassis, and the stock bump is conical, so a spacer would require some fabrication/machining.
IIRC, the spacers I've seen on vitaras have been welded in.
Steve.
IIRC, the spacers I've seen on vitaras have been welded in.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Not sure about the diameter - I agree that 80 series "in coil" rear bumpstops are excellent, but they might be a touch to big to fit inside a vitara rear coil without binding.
It's an idea though.
Gwagen front bumpstops are probably ideal..... not the easiest to come across though
Steve.
It's an idea though.
Gwagen front bumpstops are probably ideal..... not the easiest to come across though
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
They're actually almost identical to the old school "aeon" assist rubber springs, which I think are still available.
Steve.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 0 guests