anyone run an alloy winch bar? any problems? bending/deforming under winch load?
cheers, Islandvitara
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
alloy bar for a sierra..winch compatible?
alloy bar for a sierra..winch compatible?
hi all, i have an alloy bar on my sierra which i dont like the look of, im tryna get hold of another style im after, but also is it safe to have a winch on it? im assume alloy is no where near as strong as a steel bar but is it safe enough to hold a winch?
anyone run an alloy winch bar? any problems? bending/deforming under winch load?
cheers, Islandvitara
anyone run an alloy winch bar? any problems? bending/deforming under winch load?
cheers, Islandvitara
just beat a Marlin in a swimming race
I've never seen an alloy winch bar...
no reason why a custom fabbed one wouldnt be able to be made though - steel mid section bolting to chassis and winch and alloy bar bolted over that?
Still, why not got steel and just use a thinner wall? same strength as alloy, a touch heavier, but no stress cracks and can always be bent back into shape if it gets a bump...
no reason why a custom fabbed one wouldnt be able to be made though - steel mid section bolting to chassis and winch and alloy bar bolted over that?
Still, why not got steel and just use a thinner wall? same strength as alloy, a touch heavier, but no stress cracks and can always be bent back into shape if it gets a bump...
The worst thing about censorship is ███████.
AFAIK, alloy bullbars can't be made strong enough (feasibly) to take winching forces long term.
The problem is the cost of the alloys required to build that kind of strength and durability, quality control in the welding process (including heat treatment?) and the method of mounting.- i.e distributing the load.
My guess is that an alloy bar that was strong enough to take heavy winching would cost many thousands of dollars to produce, and would likely require chassis modifications to add enough load distributing mounts.
anyway, that's kinda off the topic. Alloy bullbars used with winches have a steel cradle inside them that the winch bolts to. The bar itself won't be strong enough for winching, and on a sierra, the weak point is going to be around the mounts.
In any case, alloy bars are a terrible choice for a 4WD that sees off road use. They fatigue, they're brittle, and they're never strong enough to prevent damage to the vehicle in circumstances where a steel bar would just need the paint touching up.
I have owned a car with an alloy bullbar. It did all of the stuff mentioned above.
Get an ARB bar and spray paint it with chrome paint is you want a shiny winch bar.
Just my 2C.
Steve.
The problem is the cost of the alloys required to build that kind of strength and durability, quality control in the welding process (including heat treatment?) and the method of mounting.- i.e distributing the load.
My guess is that an alloy bar that was strong enough to take heavy winching would cost many thousands of dollars to produce, and would likely require chassis modifications to add enough load distributing mounts.
anyway, that's kinda off the topic. Alloy bullbars used with winches have a steel cradle inside them that the winch bolts to. The bar itself won't be strong enough for winching, and on a sierra, the weak point is going to be around the mounts.
In any case, alloy bars are a terrible choice for a 4WD that sees off road use. They fatigue, they're brittle, and they're never strong enough to prevent damage to the vehicle in circumstances where a steel bar would just need the paint touching up.
I have owned a car with an alloy bullbar. It did all of the stuff mentioned above.
Get an ARB bar and spray paint it with chrome paint is you want a shiny winch bar.
Just my 2C.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
i was thinkin of puttin a winch but i have a alloy bar, the way i was thinking was to fab some brackets up to bolt to the chassi and have the winch bolted straight to the new mounts behind the alloy bar. so it works seperately
[quote="MissForby"]"I like Pillows. I'm not allowed anything hard" :D[/quote]
94 vitara, rear air locker, 31's, dual battery, custom front and rear tube bars, chopped guards, reduction gears
94 vitara, rear air locker, 31's, dual battery, custom front and rear tube bars, chopped guards, reduction gears
I have had a few alloy bared 4x4's and have been happy with the performance of the bars, they have been used in anger (boucing marsupials, a small bovine) A few trees, some ruts and rocks, sure they are not ultimatley as strong as a steel unit but for most of the population they work well enough.
Especially when you consider the weight penalty of steel bullbar and winch Vs alloy bull bar steel cradle and winch.
Biggest issue with most alloy bull bars is they are UGLY.
Especially when you consider the weight penalty of steel bullbar and winch Vs alloy bull bar steel cradle and winch.
Biggest issue with most alloy bull bars is they are UGLY.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Gwagensteve wrote: Get an ARB bar and spray paint it with chrome paint is you want a shiny winch bar.
Just my 2C.
Steve.
something i'd do if i could get my hands on chrome spraypaint hahaha thanks steve as for ugly - ive seen a great looking alloy bar on a sierra up here in townsville, different to mine and polished looked hot!! i'll find pics of the style im after and post em along with pics of mine...
as for danssurf82 -
i was thinking this too - would this be an ideal option for those of us wanting an alloy bar and winch setup?i was thinkin of puttin a winch but i have a alloy bar, the way i was thinking was to fab some brackets up to bolt to the chassi and have the winch bolted straight to the new mounts behind the alloy bar. so it works seperately i was thinking that aswell!!!
[/quote]
just beat a Marlin in a swimming race
I'm planning on fitting a Warn 6000 or similar behind my alloy bar, which I believe was made by ECB.
My plan is to make up a steel winch cradle behind the bar that does all of the work, then bolt the bar to that. I hope it will work because I like the look of my current bar, and so far it has done the job well! If my plan doesn't work out then I will be forced to go an ARB winch bar I guess... Hopefully someone has successfully made this work?
Cheers,
Pez
My plan is to make up a steel winch cradle behind the bar that does all of the work, then bolt the bar to that. I hope it will work because I like the look of my current bar, and so far it has done the job well! If my plan doesn't work out then I will be forced to go an ARB winch bar I guess... Hopefully someone has successfully made this work?
Cheers,
Pez
91 Sierra soft-top. My Members thread: http://www.outerlimits4x4.com/viewtopic.php?f=16&t=169128
Yeah I like it. It works well too - it has a good approach angle and so far has survived a few knocks. Mine is painted in black hammer-tone.
There is a fair bit of room behind the bar for a winch and cradle. I'm still a few months off getting onto that project, but I'll keep you posted!
Pez
There is a fair bit of room behind the bar for a winch and cradle. I'm still a few months off getting onto that project, but I'll keep you posted!
Pez
91 Sierra soft-top. My Members thread: http://www.outerlimits4x4.com/viewtopic.php?f=16&t=169128
Who is online
Users browsing this forum: No registered users and 34 guests