Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

FJ40 mods

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 7
Joined: Wed Jun 24, 2009 5:10 pm
Location: Newcastle

FJ40 mods

Post by faithy1234 »

G'day,

I've got a '79 SWB FJ40 with a 2F. I'm planning on putting a 4L straight six and auto from an EF Falcon in and running GQ diffs, suspension (lifted) and transfer case. I've spoken to an engineer and he's happy to engineer it all after I have it welded up by a pro.

My main reason is that I want an auto and the Ford engine and auto are so common and easy to replace if needed. The engines go ok too with a cam (for bottom end and mid range, of course) and headers, and they're better on fuel than the 2F. I was going to go 80 series diffs but I've lined up some GQ diffs, control/radius arms and transfer case from a mate. I've heard the patrol transfer is tougher than my FJ40's transfer.

Can anyone see a problem with this? I know half of you would recommend a v8 or to stay with leaves but I have all this gear lined up and reckon it'd be alright. Any ideas?

Cheers,
Josh
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

i think if your going that far crazy not to go a V8.
and som fords go sweet. but ive seen one in a jeep with the dizzy down low at front. everytime he hit a puddle the thing would stall.

holdens have it up the back.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Posts: 194
Joined: Wed May 04, 2005 9:06 pm
Location: south coast n.s.w.

Post by croozy »

I think you'll find the firewall wil need a few mods with the injected six as well
it's never a problem until it can't be fixed, even then it' only a minor set back
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

maybe have a look (SEARCH) too in members and toyota. a few blokes have done just such an engine conversion be handy to contact and view buildups?
and others have gone GQ diffs, the prices have but im not sure if their build is on here.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

I've done the EF I6 conversion to cruiser 5 speed. No big firewall mods, just a little "persuading" to clear the end of the inlet manifold. Good conversion. EF I6 is distributorless. They run a coil pack mounted low under the inlet manifold which can easily be relocated to the top of the rocker cover. Check the link in my sig for pics.
Posts: 360
Joined: Thu Dec 06, 2007 8:06 pm
Location: Hiding from dumb questions. . . . .

Post by pricey »

We only went GQ in the front of our 40. We used an 80 series rear.
With the coil conversion we used the GQ coil mount and welded it straight to the chassis with some bracing, and fitted a 5 link as that was what had been previously fitted when we bought it.
Everyone loves a 40!

www.tufftruck.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests