Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4 Runnnner rolled.. few questions..

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 151
Joined: Thu Oct 23, 2008 10:19 pm
Location: Newcastle

4 Runnnner rolled.. few questions..

Post by IN24BZ »

hi there my mate has a 2.8 forerunner 1994 model , rolled over and stuffed the roof not insured etc etc , am mechanic so no problems with swapping another body onto it without going into too much detail , just wondering if the petrol body is different in any way to the diesel just so i know what i should look for in a replacement.. thankyou very much in advance , ps before i get the just put a new roof pressing on it there is far more damage than just the roof , the chassis is fine as is the engine and rest of the driveline.
Beep. Beep. Beep.. Whats that sound? Oh Look Its Just Another ZD30 On A Tow Truck.. =)

What torque? Tighten it till it strips and then back it off half a turn.
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

I wouldn't think there are any diferences that arent bolt on so it should be fine.

Ask over here and you will get an in depth answer

http://www.toyotasurf.asn.au/forum/

Cheers
Top
Posts: 151
Joined: Thu Oct 23, 2008 10:19 pm
Location: Newcastle

Post by IN24BZ »

thanks mate , bloke from works car just baught it 1 week ago , it was imaculate too... its hes first 4x4 too
Beep. Beep. Beep.. Whats that sound? Oh Look Its Just Another ZD30 On A Tow Truck.. =)

What torque? Tighten it till it strips and then back it off half a turn.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Basicaly the same you will find however that not all bolt holes are in the engine bay if you buy a petrol body. Specifically the bolt holes for the fuel filter. There may be others im not aware of. But it can all be worked around. I would just buy the best one you can find and not worry if its petrol or diesel.
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

V6 body will have the transmission and low range sticks in a different size/position hole, also the console will be different as will the wiring.


So I would think that the wiring looms will be your biggest hassle between petty and diesal.

Cheers
Top
Posts: 151
Joined: Thu Oct 23, 2008 10:19 pm
Location: Newcastle

Post by IN24BZ »

yep i was looking at a 22R powered one as for the looms and shit i was just going to use the diesel interiour and dash and shit as it was an SR5
Beep. Beep. Beep.. Whats that sound? Oh Look Its Just Another ZD30 On A Tow Truck.. =)

What torque? Tighten it till it strips and then back it off half a turn.
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

IN24BZ wrote:yep i was looking at a 22R powered one as for the looms and shit i was just going to use the diesel interiour and dash and shit as it was an SR5
If it's an SR5 Limited then keep the drivers seat they are a recaro 7 way sports adjustable seat and much much better than standard.

Cheers
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 9 guests