Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

little confsed with body lifts on qld

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 653
Joined: Tue Feb 17, 2009 9:48 am
Location: Mt Isa QLD

little confsed with body lifts on qld

Post by Kingston_99 »

i wanna do a body lift on my hilux, posible max 2 inch cab lift.

the only thing im confused is how do i go about doin the job legal.

do i have to put the blocks in and then get an engineer to look at it and then go to DOT? or can i jus go straigth to the DOT?
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

An individual vehicle modification application to be made to Queensland Transport for
body lift kits (blocks between body/cabin and chassis mounts) up to 50 mm in
height. Applications must indicate all changes being made to implement the
modification (including steering and braking componentry) and materials used in the
lifting blocks. Body lifts in excess of 50 mm will not be considered.
If acceptable, a letter of approval for the installation of a body lift kit will be issued by
Queensland Transport
You call QLD transport and get the application form.

You write down how much you want to lift by, ALL changes which must/will be made as part of the lift. What lift materials will be used.

They give you written permission, you do the lift, you take it to DOT to get inspected. They will inspect the whole car. Engineers and or approved officers cannot inspect body lifts in QLD.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 653
Joined: Tue Feb 17, 2009 9:48 am
Location: Mt Isa QLD

Post by Kingston_99 »

ok thanks mate
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

Post by shortyq »

ISUZUROVER wrote:
An individual vehicle modification application to be made to Queensland Transport for
body lift kits (blocks between body/cabin and chassis mounts) up to 50 mm in
height. Applications must indicate all changes being made to implement the
modification (including steering and braking componentry) and materials used in the
lifting blocks. Body lifts in excess of 50 mm will not be considered.
If acceptable, a letter of approval for the installation of a body lift kit will be issued by
Queensland Transport
You call QLD transport and get the application form.

You write down how much you want to lift by, ALL changes which must/will be made as part of the lift. What lift materials will be used.

They give you written permission, you do the lift, you take it to DOT to get inspected. They will inspect the whole car. Engineers and or approved officers cannot inspect body lifts in QLD.
the last sentence,please explain!
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

pretty much what it says, the authorised people used to approve "Blue Plated" mods, engine conversions, different seats, cab cuts etc. etc. can not approve a body lift. You must first apply for it then get the vehicle inspected by the Department of Transport and they will inspect brakes and suspension and run their eye over the whole car.
;)
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

shortyq wrote:
ISUZUROVER wrote: Engineers and or approved officers cannot inspect body lifts in QLD.
the last sentence,please explain!
To translate into WA-speak...

In QLD, modifications are approved by "approved officers" - basically mechanics who are given authorisation to approve modifications as well as do pre-rego RWCs.

Unlike WA, the transport department do not do roadworthy checks or approve modifications - with the exception of body lifts or vehicles that are defected (yellow sticker in WA).
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

Post by shortyq »

ISUZUROVER wrote:
shortyq wrote:
ISUZUROVER wrote: Engineers and or approved officers cannot inspect body lifts in QLD.
the last sentence,please explain!
To translate into WA-speak...

In QLD, modifications are approved by "approved officers" - basically mechanics who are given authorisation to approve modifications as well as do pre-rego RWCs.

Unlike WA, the transport department do not do roadworthy checks or approve modifications - with the exception of body lifts or vehicles that are defected (yellow sticker in WA).
are you in wa or qld,and what you are saying BL,s dont need engo or pre approval right?
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

shortyq wrote:are you in wa or qld,and what you are saying BL,s dont need engo or pre approval right?
In WA, but from QLD.

No, not at all. Read the first post again. In QLD body lifts need prior written approval, and can only be assessed and given final approval by DOT inspectors. Which is different for all other mods in QLD.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 61
Joined: Tue May 19, 2009 4:12 pm
Location: lost

Post by bigoll »

in QLD u can do a 50mm body lift that is the max measurment from the top of chassie mount to bottom of cab mount, not lift it 50mm from standard. all u have to do is use correct grade bolts etc. this can be found out by talking to main roads and there is no dot plate or blue plate just a letter of approval. talk to main roads first its very easy if u ask the questions.
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

bigoll wrote:in QLD u can do a 50mm body lift that is the max measurment from the top of chassie mount to bottom of cab mount, not lift it 50mm from standard.
umm, no..
queensland transport wrote:body lift kits (blocks between body/cabin and chassis mounts) up to 50 mm in
height
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 34
Joined: Wed May 13, 2009 8:33 am
Location: Weipa

Re: little confsed with body lifts on qld

Post by 8maddog8 »

Kingston_99 wrote:i wanna do a body lift on my hilux, posible max 2 inch cab lift.

the only thing im confused is how do i go about doin the job legal.

do i have to put the blocks in and then get an engineer to look at it and then go to DOT? or can i jus go straigth to the DOT?
Just put them in and dont worry about it :P

You dont need a roadworthly certificate up here anyway :D
'96 GQ Wagon, RD28T @ 13psi and now Intercooled, 2 3/4" straight through, 2.5" + 2" Lift, 33's, front detriot locker, 12,000lb winch, snorkel, etc...
Posts: 653
Joined: Tue Feb 17, 2009 9:48 am
Location: Mt Isa QLD

Re: little confsed with body lifts on qld

Post by Kingston_99 »

8maddog8 wrote:
Kingston_99 wrote:i wanna do a body lift on my hilux, posible max 2 inch cab lift.

the only thing im confused is how do i go about doin the job legal.

do i have to put the blocks in and then get an engineer to look at it and then go to DOT? or can i jus go straigth to the DOT?
Just put them in and dont worry about it :P

You dont need a roadworthly certificate up here anyway :D
haha true, where about are you?
Posts: 34
Joined: Wed May 13, 2009 8:33 am
Location: Weipa

Re: little confsed with body lifts on qld

Post by 8maddog8 »

Kingston_99 wrote: haha true, where about are you?
Good ol' Weipa
'96 GQ Wagon, RD28T @ 13psi and now Intercooled, 2 3/4" straight through, 2.5" + 2" Lift, 33's, front detriot locker, 12,000lb winch, snorkel, etc...
Posts: 653
Joined: Tue Feb 17, 2009 9:48 am
Location: Mt Isa QLD

Re: little confsed with body lifts on qld

Post by Kingston_99 »

8maddog8 wrote:
Kingston_99 wrote: haha true, where about are you?
Good ol' Weipa
ok not sure if i'v seen ur car. mite know mine, jus keep an ear out for a noise lux wit no muffler
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests