Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tail shaft help...

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 355
Joined: Fri Jan 09, 2009 2:17 pm
Location: Maitland, where the best are built

tail shaft help...

Post by 31zook »

hey i just installed a 1L case (with a 4WD activation light) into my 89 WT 1.3 sierra. I flogged the flanges off another 1.3 case i had laying around, and now none of the shafts line up? Is there any difference between a 1.3NT and a 1.3WT?
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Re: tail shaft help...

Post by mud4b »

31zook wrote:hey i just installed a 1L case (with a 4WD activation light) into my 89 WT 1.3 sierra. I flogged the flanges off another 1.3 case i had laying around, and now none of the shafts line up? Is there any difference between a 1.3NT and a 1.3WT?

Yes the hole size is slightly different being 8mm hole and 10mm hole. you need the 10.

cheers mark.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests