Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

can anyone help point me in the right direction?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 203
Joined: Thu Aug 11, 2005 11:45 am
Location: Rosedale, gippsland

can anyone help point me in the right direction?

Post by 88pajero »

I have just brought a front locker for my troopy and need the correct tensions ect to do things, ie bearing caps etc, up to when putting the diff/ axles back togeather. Does anyone know were I can get my hands on this info online, or does anyone have any smarts hey can share with me?

unfortunately I dont have a workshop manual and I dont think those gregories manuals will cover what I need, but if someone can tell me weather they do or dont ill get one if itll help.
Jabber gone. Now have 98 nissan terrano and a 94 4.2ldiesel rv troopy on 33s slowly getting the fancy bits. How the hell do I change my user name?
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: can anyone help point me in the right direction?

Post by bogged »

try www.lcool.org
Top
Posts: 324
Joined: Thu Aug 09, 2007 11:18 am
Location: Sydney

Post by Evski »

I just did one in the front of my HiLux and the workshop that helped me said to set the back lash back to what it was when you pulled the diff out, not the factory settings. Must be right as the locker is great. If you can get a dial indicator, you will be able to measure this accuratley.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests